ACE5372_11 Datasheet, PDF (17/31 Pages) ACE Technology Co., LTD. – Low Power Real-Time Clock (RTC)

ACE5372
Low Power Real-Time Clock (RTC)
When data is read from the slave immediately after 7bit addressing from the master
S
0
1 1 0 0 1 0 1 A Data A Data A_ P
Slave address
Read
When the transmission direction is to be changed during transmission
Data Transmission Write Format in the ACE5372
A) First send 7 address bit(0110010), the eighth bit is write command “0”.
B) When the ninth bit is ACK signal, ACE5372 is under writing condition.
C)In the following byte, the high 4 bits are determined as internal address in ACE5372(0H-FH), the low 4
bits are transmission model.
D)After another bit’s ACK signal, it starts writing data normally.
E)After writing 1 byte data, there will be 1 bit ACK signal and then writing data in next 1 byte starts. Only
when there is a stop signal in the bit after ACK signal, can the writing operation be stopped.
Example of data writing (When writing to internal address 4H to 5H)
CPU to ACE5372
Start condition
ACE5372 to CPU
Stop condition
Acknowledge signal
VER 1.3 17