|
ACEDW01 Datasheet, PDF (1/19 Pages) ACE Technology Co., LTD. – One Cell Lithium-ion/Polymer Battery Protection IC | |||
|
ACEDW01
One Cell Lithium-ion/Polymer Battery Protection IC
Description
This protection IC was developed for use with lithium-ion/lithium polymer 1-cell serial batteries.
It detects overcharge, overdischarge, discharge overcurrent and other abnormalities, and functions to
protect the battery by turning off the external MOSFET.
The IC also has a built-in timer circuit (for detection delay times), so fewer external parts can be used in
protection circuit configuration.
Features
1. High-accuracy voltage detection circuit
ï· Overcharge detection voltage 4.200 to 4.400V Accuracy: ±50Mv
ï· Overcharge release voltage 3.900 to 4.400V Accuracy: ±50mV
ï· Overdischarge detection voltage 2.30 to 3.00V Accuracy: ±100mV
ï· Overdischarge release voltage 2.30 to 3.40V Accuracy: ±100mV
ï· Discharge overcurrent detection voltage 150mV Accuracy: ±100mV
ï· Short-circuiting detection voltage 1.35V Accuracy: ±100mV
2. Delay times are generated by an internal circuit (external capacitors are unnecessary).
ï· Overcharge delay time 100ms typ.
ï· Overdischarge delay time 50ms typ.
ï· Discharge overcurrent delay time 10ms typ.
ï· Charge overcurrent detection voltage 10ms typ.
ï· Short circuit delay time 5μs typ.
3. Power-down functionâYesâ/ Noâare selectable (See Model List).
4. Auto overdischarge recovery function âYesâ/ âNoâ are selectable (See Model List).
5. Low current consumption
ï· Operation mode 3.0μA typ., 6.0μA max. (VCC=3.9V)
ï· Power-down mode 0.1μA max. (VCC=2.0V)
ï· Auto overdischarge mode 2.0μA max. (VCC=2.0V)
6. 0 V battery charge function âavailableâ / âunavailableâ are selectable (See Model List).
7. operation temperature range -40â~+85â
VER 1.2 1
|
▷ |