ACE605 Datasheet, PDF (1/8 Pages) ACE Technology Co., LTD. – Ultra Low Dropout 2A CMOS LDO

ACE605
Ultra Low Dropout 2A CMOS LDO
Description
The ACE605 series are high performance linear voltage regulators that provide ultra low-dropout voltage,
high output current in lowest output voltage. It operates from an input of 1.4V to 5.5V and provides output
current up to 2A thus is suitable to drive digital circuits requiring low voltage at high currents.
The ACE605 has superior regulation over variations in line and load. Also it provides fast respond to step
changes in load. Other features include over-current and overtemperature protection. The adjustable
version has enable pin to reduce power consumption in shutdown mode.
The devices are available ADJ output , and via exteral R adjust output voltage from 0.6V to Vin-0.3V,
0.6V is the reference voltage. The BM9165 have enable function, that is good for poratble system for
main chip on and off. In order to have lower dropout and bigger current output Ven should 0.8~1.0V
higher than Vin, but can work if same. Power pad sop8 can output over 2A and 1.6A without the pad.
Features
 300mV Dropout @ 2A (1.2V output)
 <300μA Low Ground Pin Current
 Excellent Line and Load Regulation
 0.1μA Quiescent Current in Shutdown Mode
 Guaranteed >2A Output Current
 Fixed Output Voltages: 1.05V, 1.2V, 1.8V, 2.5V
 Adjustable Output Voltage from 0.6V to 4.5V
 Over-Temperature/Over-Current Protection
Application
 Card reader and Battery-Powered Equipment
 Mother Board/Graphic Card
 LCD-TV , NET BOOK , USB Net card
 NET-BOOK, pin-pin with RT9025, RT9018
Packaging Type
SOP-8
VER 1.3 1