ACE25QA160G Datasheet, PDF (1/29 Pages) ACE Technology Co., LTD. – 16M BIT SPI NOR FLASH

ACE25QA160G
16M BIT SPI NOR FLASH
Description
The ACE25QA160G is 16M-bit Serial Peripheral Interface (SPI) Flash memory, and supports the Dual
SPI: Serial Clock, Chip Select, Serial Data I/O0 (SI), I/O1 (SO). The Dual Output data is transferred with
speed of 108Mbits/s. The device uses a single low voltage power supply, ranging from 2.7 Volt to 3.6 Volt.
Additionally, the device supports JEDEC standard manufacturer and device ID.
In order to meet environmental requirements, offers an 8-pin SOP, an 8-pin SOP 208mil, an 8-pin TSSOP ,
an 8-pin DIP , an 8-pad USON 3x3-mm packages.
Features
 Serial Peripheral Interface (SPI)
Standard SPI: SCLK, /CS, SI, SO, /WP
Dual SPI: SCLK, /CS, IO0, IO1, /WP
 Read
Normal Read (Serial): 55MHz clock rate
Fast Read (Serial): 108MHz clock rate
Dual Read: 108MHz clock rate
 Program
Serial-input Page Program up to 256bytes
 Erase
Block erase (64/32 KB)
Sector erase (4 KB)
Chip erase
 Program/Erase Speed
Page Program time: 0.7ms typical
Sector Erase time: 100ms typical
Block Erase time: 0.3/0.5s typical
Chip Erase time: 15s typical
 Flexible Architecture
Sector of 4K-byte
Block of 32/64K-byte
 Low Power Consumption
20mA maximum active current
5uA maximum power down current
 Software/Hardware Write Protection
Enable/Disable protection with WP Pin
Write protect all/portion of memory via software
Top or Bottom, Sector or Block selection
VER 1.1 1