AK5364096W_09 Datasheet, PDF (2/2 Pages) ACCUTEK MICROCIRCUIT CORPORATION – Dynamic Random Access Memory

FUNCTIONAL DIAGRAM
MECHANICAL DIMENSIONS
4.250"
3.985"
0.330"
MAX
0.875"
MAX
+
0.425"
0.375" ^0.250"
1
0.080"
0.125"
CLCL
+
72
0.050"
TYP
CL CL
ORDER INFORMATION
PART NUMBER CODING INTERPRETATION
Position
12345678
1 Product
AK = Accutek Memory
2 Type
4 = Dynamic RAM
5 = CMOS Dynamic RAM
6 = Static RAM
3 Organization/Word Width
1 = b y 1 16
4 = by 4 32
8 = by 8 36
9 = by 9
= by 16
= by 32
= by 36
4 Size/Bits Depth
64 = 64K
256 = 256K
1024 = 1 MEG
4096 = 4 MEG
8192 = 8 MEG
16384 = 16 MEG
The numbers and coding on this page do not include all variations
available, but are shown as examples of the most widely used
variations. Contact Accutek if other information is required.
Position
5 Package Type
G = Single In-Line Package (SIP)
S = Single In-Line Module (SIM)
D = Dual In-Line Package (DIP)
W = .050 inch Pitch Edge Connect
Z = Zig-Zag In-Line Package (ZIP)
6 Special Designation
P = Page Mode
N = Nibble Mode
K = Static Column Mode
W = Write Per Bit Mode
V = Video Ram
7 Separator
- = Commercial 0⁰C to +70⁰C
M = Military Equivalent Screened
(-55⁰C to +125⁰C)
I = Industrial Temperature Tested
(-45⁰C to +85⁰C)
X = Burned In
8 Speed (first two significant digits)
DRAMS
SRAMS
50 = 50 nS
8 = 8 nS
60 = 60 nS 12 = 12 nS
70 = 70 nS 15 = 15 nS
12345678
ACCUTEK
MICROCIRCUIT CORPORATION
5 NEW PASTURE ROAD
NEWBURYPORT, MA 01950-4040
PHONE: [phone] FAX: [phone]
Email: [e-mail]
Internet: www.accutekmicro.com
Accutek reserves the right to make changes in specifications at any time and
without notice. Accutek does not assume any responsibility for the use of
any circuitry described; no circuit patent licenses are implied. Preliminary
data sheets contain minimum and maximum limits based upon design ob-
jectives, which are subject to change upon full characterization over the spe-
cific operating conditions.