AK5322048N_09 Datasheet, PDF (2/2 Pages) ACCUTEK MICROCIRCUIT CORPORATION – Dynamic Random Access Memory

FUNCTIONAL DIAGRAM
DQ0
DQ1
DQ2
DQ3
DQ4
DQ5
DQ6
DQ7
DQ8
DQ9
DQ10
DQ11
DQ12
DQ13
DQ14
DQ15
DQ0
DQ1
DQ2
DQ3
DQ4
DQ5
DQ6
DQ7
DQ8
DQ9
DQ10
DQ11
DQ12
DQ13
DQ14
DQ15
DQ0
DQ1
DQ2
DQ3
DQ4
DQ5
DQ6
DQ7
DQ8
DQ9
DQ10
DQ11
DQ12
DQ13
DQ14
DQ15
DQ0
DQ1
DQ2
DQ3
DQ4
DQ5
DQ6
DQ7
DQ8
DQ9
DQ10
DQ11
DQ12
DQ13
DQ14
DQ15
MECHANICAL DIMENSIONS
0.700"
0.250"
1.000" ^0.070"
0.300"
0.197"
2.350"
0.158"
0.150"
2.033"
0.100"
0.040"
ORDER INFORMATION
Position
12345678
PART NUMBER CODING INTERPRETATION
Position
12345678
1 Product
AK = Accutek Memory
2 Type
4 = Dynamic RAM
5 = CMOS Dynamic RAM
6 = Static RAM
3 Organization/Word Width
1 = b y 1 16
4 = by 4 32
8 = by 8 36
9 = by 9
= by 16
= by 32
= by 36
4 Size/Bits Depth
64 = 64K
256 = 256K
1024 = 1 MEG
4096 = 4 MEG
8192 = 8 MEG
16384 = 16 MEG
The numbers and coding on this page do not include all variations avail-
able, but are shown as examples of the most widely used variations.
Contact Accutek if other information is required.
5 Package Type
G = Single In-Line Package (SIP)
S = Single In-Line Module (SIM)
D = Dual In-Line Package (DIP)
W = .050 inch Pitch Edge Connect
N = Dual Row Sodim
Z = Zig-Zag In-Line Package (ZIP)
6 Special Designation
P = Page Mode
N = Nibble Mode
K = Static Column Mode
W = Write Per Bit Mode
V = Video Ram
7 Separator
- = Commercial 0⁰C to +70⁰C
M = Military Equivalent Screened
(-55⁰C to +125⁰C)
I = Industrial Temperature Tested
(-45⁰C to +85⁰C)
X = Burned In
8 Speed (first two significant digits)
DRAMS
SRAMS
60 = 60 nS 12 = 12 nS
70 = 70 nS 15 = 15 nS
80 = 80 nS 20 = 20nS
ACCUTEK _{MICROCIRCUIT CORPORATION}
5 NEW PASTURE ROAD
NEWBURYPORT, MA 01950-4040
Accutek reserves the right to make changes in specifications at any time and with-
PHONE: [phone] FAX: [phone]_{out notice. Accutek does not assume any responsibility for the use of any circuitry}
Email: [e-mail]
Internet: www.accutekmicro.com
described; no circuit patent licenses are implied. Preliminary data sheets contain
minimum and maximum limits based upon design objectives, which are subject to
change upon full characterization over the specific operating conditions.