AK08SOIC-D300_12 Datasheet, PDF (1/8 Pages) ACCUTEK MICROCIRCUIT CORPORATION – DIP to SOIC Adapter Modules

ACCUTEK
MICROCIRCUIT CORPORATION
DIP to SOIC Adapter Modules
DIP to SOIC ADAPTER
MODULES
ELIMINATE THE
NEED TO
REDESIGN
MOTHERBOARDS
OR MAY BE USED
FOR
BREADBOARD
PROTOTYPING
DESCRIPTION
The Accutek SOIC family of Adapter Modules permit the connection
of older Dual-Inline-Packages onto circuit board sites which are de-
signed for standard pitch SOIC devices.
Accutek SOIC's provide a one-to-one footprint with standard
SOIC’s for adapting DIP packages onto printed circuit boards.
These adapter modules save costly motherboard redesigns.
Accutek SOIC’s are offered with standard 8, 14, 16 and 20 pin
counts to accommodate components with 0.050” (0.65mm) lead
spacing and 0.250” (5.0mm) body width.
Accutek DIP to SOIC Adapter Modules are available with 0.032" pin
holes ready to solder a DIP IC into, or they are available with a
socket installed ready for the DIP IC to be inserted.
All modules are designed in-house using PCB CAD workstations.
Final assembly and 100% testing are also performed in-house.
FEATURES
· Saves costly redesign of current motherboards
· Fully tested with lifetime limited warranty
· IC assembly and testing available
· EPROM and Flash programming available
· Custom configurations available
ORDERING OPTIONS
· Adapter only
· Customer supplies chips - Accutek assembles on Accutek
adapters, tests and delivers finished product in antistatic tubes.
· Complete turnkey - Accutek purchases IC’s and passives. Then
assembles, tests and delivers finished product in antistatic tubes.
ACCUTEK
MICROCIRCUIT CORPORATION
5 NEW PASTURE ROAD
NEWBURYPORT, MA 01950-4040
PHONE: [phone] FAX: [phone]
Email: [e-mail]
Internet: www.accutekmicro.com