ASPI-8040S Datasheet, PDF (4/4 Pages) Abracon Corporation – Wire Wound Magnetically Shielded SMD Power Inductor

Wire Wound Magnetically Shielded SMD Power Inductor
ASPI-8040S
Pb RoHS/RoHS II compliant
8.0 x 8.0 x 4.2mm
REFLOW PROFILE
∆ 1~2 °C/sec. Ramp
∆ Pre-heating: 150~190°C/90±30 sec.
∆ Time above 240°C: 20~40sec
∆ Peak temperature: 260°C Max./5sec;
∆ Solder paste: Sn/3.0Ag/0.5Cu
∆ Max.2 times for Re-flowing
TAPE & REEL:
Packing
T: 1,000pcs / reel
A0
B0
W
E
F
P0
P1
P2
D0
8.35±0.1 8.35±0.1 16.0±0.3 1.75±0.1 7.5±0.1 4.0±0.1 12.0±0.1 2.0±0.1 1.5+0.1/-0.0
T
0.4±0.03
K
4.4±0.1
Storage Conditions
a. To maintain the solderability of terminal electrodes and to keep the packing material in good condition, temperature and
humidity in the storage area should be controlled.
b. Recommended conditions: -10^oC ~ 40 ^oC, 70% RH (Max.)
c. Even under ideal storage conditions, solderability of products electrodes may decrease as time passes. For this reason, product
should be used with one year from the time of delivery.
d. In case of storage over 6 months, solderability shall be checked before actual usage.
Dimension: mm
ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications.
Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component
failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from
Abracon Corporation is required. Please contact Abracon Corporation for more information.
ABRACON IS
ISO9001:2008
CE RTIFIED
Visit www.abracon.com for Terms & Conditions of Sale Revised: 02.03.14
30332 Esperanza, Rancho Santa Margarita, California 92688
tel [phone] | fax [phone] | www.abracon.com