PAS-BC3WK Datasheet, PDF (3/3 Pages) Abracon Corporation – The majority of electronic designs have some form of timing associated with them

PIERCE ANALYZER SYSTEM (PAS)
ADVANCED BOARD CHARACTERIZATION SERVICE
PAS-BC3WK
FEATURES:
• Circuit characterization; providing best possible match between Quartz Crystal, oscillator loop and associated components
• Eliminates probability of oscillator start-up issues related to inadequate design or marginal component performance
• Eliminates production launch issues related to crystal oscillator based timing circuit
• Solves for design margin uncertainty
• Provides customer’s oscillator circuit overview in the form of a detailed report, which could be an ideal 3rd party assessment
for the design history file or PPAP documentation. This report encompasses both the stand-alone crystal performance, as well
as in-circuit behavior outlining safety factor as a function of crystal’s ESR, etc.
• For additional information, please contact Abracon at: [e-mail]
DELIVERABLES:
Abracon provides a detailed test report encompassing:
• Stand alone Quartz Crystal characteristics including:
- Motional parameters (Cm, Lm, ESR &Co)
- Narrow Band Frequency Response Plot
- Wide Band Frequency Response PlotoAdmittance versus Suseptance Plot
- Frequency dependence versus load capacitance plot
• Oscillator loop
- Initial frequency accuracy and drive level as seen by the crystal with measured ESR
- Worst case projected drive level with maximum specified ESR
- Safety Factor of the oscillator loop under both typical and maximum ESR
- Recommendation on proper component selection (C1, C2 & Rs when applicable) for best compromise with
respect to Safety Factor and Frequency accuracy
- Recommendation on the Abracon Crystal part # with proper plating load and other key attributes to enable the
most robust design, specific to the µcontroller/processor implemented
ORDERING INFO:
PAS-BC1WK Analysis & Report with 1-week maximum lead-time
PAS-BC2WK Analysis & Report with 2-week maximum lead-time
PAS-BC3WK Analysis & Report with 3-week maximum lead-time
ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated,
Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application
requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme
operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information.
ABRACON ISS
ISO9001:2008
CEERRTTIIFFIIEEDD
Visit www.abracon.com for Terms & Conditions of Sale Revised: 03.12.12
30332 Esperanza, Rancho Santa Margarita, California 92688
tel [phone] | fax [phone] | www.abracon.com