ASTMLP Datasheet, PDF (3/13 Pages) Abracon Corporation – Consumer electronics

Low power, Programmable SMD MEMS Oscillator
ASTMLP
ASTMLP
2.0 x 1.6 x 0.75mm; 2.5 x 2.0 x 0.75mm;
Pb RoHS/RoHS II compliant 3.2 x 2.5 x 0.75mm; 5.0 x 3.2 x 0.75mm;
7.0 x 5.0 x 0.9mm
Absolute Maximum Ratings
Attempted operation outside the absolute maximum ratings may cause permanent damage to the part. Actual
performance of the IC is only guaranteed within the operational specifications, not at absolute maximum ratings.
Parameters
Storage Temperature
V_DD
Electrostatic Discharge (HBM)
Soldering Temperature
(follow standard Pb free soldering guidelines)
Junction Temperature ⁽¹⁾
Min. Max. Unit
-65 150 °C
-0.5 4
V
2000 V
260 °C
150 °C
Note: 1. Exceeding this temperature for extended period of time may damage the device
Thermal Consideration
Package
θJA, 4 Layer Board θJA, 2 Layer Board θJC, Bottom
(°C/W)
(°C/W)
(°C/W)
7.0 x 5.0mm
142
273
30
5.0 x 3.2mm
97
199
24
3.2 x 2.5mm
109
212
27
2.5 x 2.0mm
117
222
26
2.0 x 1.6mm
152
252
36
Maximum Operating Junction Temperature ⁽²⁾
Max. Operating Temperature (ambient)
7 0°C
85°C
Max. Operating Junction Temperature
80°C
95°C
Note: 2. Datasheet specifications are not guaranteed if junction temperature exceeds the maximum operating junction temperature
PART IDENTIFICATION:
ASTMLP - -
MHz- - -
Package Size
A: 2.0x1.6mm
D: 2.5x2.0mm
E: 3.2x2.5mm
FL: 5.0x3.2mm
V: 7.0x5.0mm
Output Frequency
in MHz
e.g. 7.3728,
125.000
Supply Voltage
Blank: 2.25V~3.63V
18: 1.8V±10%
25: 2.5V±10%
28: 2.8V±10%
30: 3.0V±10%
33: 3.3V±10%
ABRACON IS
ISO9001:2008
CE RTIFIED
Operating Temp.
E: -20°C ~ +70°C
L: -40°C ~ +85°C
Freq. Stability
J: ±20ppm
R: ±25 ppm
C: ±50 ppm
Pin 1 Function
E: Output Enable
S: Standby
N: No Connect
Packaging
Blank: Bulk
T: Tape & Reel
(1kpcs / reel)
T3: Tape & Reel
(3kpcs / reel)
Output Drive Strength*
Blank: Default
L**
A**
R
B
T
E
U
F
* See Table 1 to 5 for the Rise/Fall times at
different drive strength and available options
** Only available for F=1MHz~110MHz
2 Faraday, Suite# B | Irvine | CA 92618 Revised: 06.30.15
Ph. 949.546.8000 | Fax. [phone]
LLC
Visit www.abracon.com for Terms and Conditions of Sale