ANFCA-5040-A02 Datasheet, PDF (3/3 Pages) Abracon Corporation – NFC Ferrite Antenna (13.56MHz)

NFC Ferrite Antenna (13.56MHz)
ANFCA-5040-A02
MATCHING CIRCUIT AND REFERENCE VALUES
Pb RoHS/RoHS II compliant
50 x 40mm
Component
L0
C0
C1
C2 (Includes C2a and
C2b values)
Rq
Value for reference
only ⁽¹⁾
560 / 330nH
（NXP / Broadcom)
180pF
33pF
68pF
0 Ohm
Notes
EMC filter resonance at 15.4MHz（NXP) and 20.6MHz
(Broadcom).
EMC filter resonance at 15.4MHz (NXP) and 20.6MHz
(Broadcom).
Antenna matching component, to achieve series resonance at
13.56MHz. (Note: Antenna matching component value may
need optimization depending upon antenna environment)
Antenna matching component, to achieve parallel resonance
at 15MHz. (Note: Antenna matching component value may
need optimization depending upon antenna environment).
Damping resistor, the Rq resistor used to lower Q-value if
above 35 Ohm, if needed.
Note (1) Values can change depending upon drive circuits, design of the antenna and environment.
Reflow Profile: Not recommended for reflow soldering
Manual Soldering: Recommended Soldering iron temperature setting: 330°C, 3 seconds max, 3 times max.
Packaging: 100pcs per polyphene bag / box
ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applica-
tions. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where
component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and
authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information.
ABRACON IS
ISO9001:2008
CE RTIFIED
2 Faraday, Suite# B | Irvine | CA 92618 Revised:10.09.15
Ph. 949.546.8000 | Fax. [phone]
LLC
Visit www.abracon.com for Terms and Conditions of Sale