ASTXR-12-26.000MHZ-511911 Datasheet, PDF (2/4 Pages) Abracon Corporation – Excellent phase noise performance

SMD TCXO
ASTXR-12-26.000MHz-511911
Pb ^{RoHS / RoHS II Compliant}
2.5 x 2.0 x 0.8mm SMD
Parameters
Enable/Disable Function (Pin 1)
Input Voltage High (VIH)
Input Voltage Low (VIL)
Stand-by Current
Enable Time (amplitude)
Enable Time (frequency)
Phase Noise @ 26MHz Carrier
(@+25°C)
@1
Hz offset
@ 10
Hz offset
@ 100
Hz offset
@ 1,000 Hz offset
@ 10,000 Hz offset
@ 100,000 Hz offset
Minimum Typical Maximum Units Notes
80%*Vdd
GND
<0.01
Vdd
20%*Vdd
1
0.5
1.5
V
Normal operating Mode
V
Power Down Mode
µA
ms
Within 90% of specified
output level
ms
Within ±0.5ppm of steady
state frequency
-64
dBc / Hz
-93
dBc / Hz
-115
dBc / Hz
-135
dBc / Hz
-149
dBc / Hz
-150
dBc / Hz
Note:
1. Parts should be shielded from drafts causing unexpected thermal gradients. Temperature changes due to ambient
air currents on the oscillator can lead to short term frequency drift
2. Specified for load stated in the Oscillator Output section at +25°C
3. AC-Coupled outputs require an external capacitor, ≥ 1nF recommended
4. Frequency shift ≤1ppm after reliability test conditions (see section 7.0)
CROSS REFERENCE INFORMATION:
ASTXR-12-26.000MHZ-511911 is equivalent to Rakon P/N 511911.
PART IDENTIFICATIONS:
ASTXR-12-26.000MHz -511911 -
Packing
Blank: Bulk
T: Tape & Reel (3k/reel)
ABRACON IS
ISO9001:2008
CE RTIFIED
Visit www.abracon.com for Terms & Conditions of Sale Revised: 07.11.14
30332 Esperanza, Rancho Santa Margarita, California 92688
tel [phone] | fax [phone] | www.abracon.com