ASTMKH Datasheet, PDF (2/7 Pages) Abracon Corporation – RTC reference clock

Ultra-miniature, Low Power, 32.768kHz MEMS Oscillator
ASTMKH
Pb RoHS/RoHS II compliant
2.0 x 1.2 x 0.6mm
(Continued)
Parameters
DC-biased Programmable Output
Voltage High Range (V_OH)
DC-biased Programmable Output
Voltage Low Range (V_OL)
Programmable Output Voltage Swing
Tolerance
Min
-0.055
Typ
0.60 to
1.225
0.35 to
0.80
Max
+0.055
Unit
V
V
V
Notes
V_dd:1.5-3.63V. I_OH =-0.2µA.10pF
load. See Part Identification section
for available V_OH/ V_OL levels.
V_dd:1.5-3.63V. I_OL =0.2µA.10pF
load. See Part Identification section
for available V_OH/ V_OL levels.
T_A= -40°C to +85°C, V_dd:1.5-3.63V
Note:
1.
2.
3.
4.
5.
Measured peak-to-peak. Tested with Agilent 53132A frequency counter. Due to the low operating frequency, the gate time
must be ≥100ms to ensure an accurate frequency measurement.
Stability is specified for two operating voltage ranges. Stability progressively degrades with supply voltage below 1.5V.
Measured peak-to-peak. Inclusive of initial tolerance at +25°C, and variations over operating temperature, rated power
supply voltage and load.
Core operating current does not include output driver operating current or load current. To derive total operating current (no
load), add core operating current + output driver operating current, where output driver operating current = C_driver*V_out*F_out.
Measured from the time V_dd reaches 1.5V.
NanoDrive^TM is a SiTime trademark.
Absolute Maximum Ratings
Attempted operation outside the absolute maximum ratings may cause permanent damage to the part. Actual
performance of the IC is only guaranteed within the operational specifications, not at absolute maximum ratings.
Parameters
Continuous Power Supply Voltage Range (V_dd)
Short Duration Max. Power Supply Voltage (V_dd)
Continuous Maximum Operating Temperature Range
Short Duration Max. Operating Temperature Range
Human Body Model (HBM) ESD Protection
Charge-Device Model (CDM) ESD Protection
Machine Model (MM) ESD Protection
Latch-up Tolerance
Mechanical Shock Resistance
Mechanical Vibration Resistance
2012 SMD Junction Temperature
Storage Temperature
Test Condition
Value
Unit
-0.5 to 3.63 V
≤30 minutes
4.0
V
Vdd:1.5-3.63V
105
°C
Vdd:1.5-3.63V, ≤30 minutes
125
°C
JESD22-A114
3000
V
JESD22-C101
750
V
JESD22-A115
300
V
JESD78 Compliant
Mil 883, Method 2002
10000
g
Mil 883, Method 2007
70
g
150
°C
-65 to +150 °C
ABRACON IS
ISO9001:2008
CE RTIFIED
5101 Hidden Creek Lane Spicewood TX 78669
Phone: [phone] | Fax: [phone]
Revised: 06.17.2017
LLC
For terms and conditions of sales please visit:
www.abracon.com