AOCJYR-24.576MHZ-M6069LF Datasheet, PDF (2/4 Pages) Abracon Corporation – Oven Controlled Crystal Oscillators

Oven Controlled Crystal Oscillators
AOCJYR-24.576MHz-M6069LF
ESD Sensitive
Pb ^{RoHS / RoHS II Compliant}
9.7 x 7.5 x 4.3 mm SMD
STANDARD SPECIFICATIONS CONTINUED:
Parameters
Root Allan Variance
Acceleration Sensitivity
Output Type
High-level Output Voltage (V_OH)
Low-level Output Voltage (V_OL)
Output Load
Rise and Fall Time (t_r, t_f)
Duty Cycle
Control Voltage (Vc)
Frequency Tuning Range
(over Control Voltage range)
Frequency Tuning Linearity
Slope
Port Input Impedance
Modulation Bandwidth
Phase Noise @ 24.576MHz Carrier
@1
Hz offset
@ 10
Hz offset
@ 100
Hz offset
@ 1,000 Hz offset
@ 10,000 Hz offset
@ 100,000 Hz offset
@ 1,000,000 Hz offset
Minimum
90%*Vdd
10
45
0.5
±5
80
Typical
7x10^-11
7x10^-11
7x10^-11
8x10^-11
8x10^-11
<2
LVCMOS
Maximum
10%*Vdd
15
20
4
55
2 .5
±15
1
Positive
3.5
Units
ppb/g
V
V
pF
ns
%
V
ppm
%
kΩ
kHz
Notes
@25°C, τ=0.1s
@25°C, τ=1.0s
@25°C, τ=10s
@25°C, τ=100s
@25°C, τ=1000s
Gamma vector of all 3 axes
from 30Hz to 1500Hz
Measured at 50% level
Ref. to Frequency @
Vc=1.5V
Deviation from linear
over control voltage
range
-55
dBc / Hz
-88
dBc / Hz
110
dBc / Hz
-135
dBc / Hz
-148
dBc / Hz
-152
dBc / Hz
-153
dBc / Hz
Note:
1.
2.
3.
The characteristics of the component may be temporarily affected by the processes of assembly and soldering.
The frequency specifications apply 48 hours after assembly. Nominal conditions apply unless otherwise stated.
Time needed for frequency to be within ±20ppb reference to frequency after 1hour, at 25°C. Parameter is
assembly and operating history dependent
After 30 days of continuous operation.
ABRACON IS
ISO9001:2008
CE RTIFIED
Visit www.abracon.com for Terms & Conditions of Sale Revised: 08.20.14
30332 Esperanza, Rancho Santa Margarita, California 92688
tel [phone] | fax [phone] | www.abracon.com