AB Datasheet, PDF (2/4 Pages) Abracon Corporation – SMD 869.0MHz SAW Filter

HC49/U CRYSTAL
AB
Pb ^{RoHS/RoHS II Compliant}
11.5 x 5.0 x 13.46mm
|||||||||||||||
OPTIONS AND PART IDENTIFICATION:
(Left blank if standard)
AB -
MHz - -
-
Frequency in MHz
Please specify the frequency
in xx.xxxxMHz.
e.g. 14.3181MHz
Load Capacitance (pF)
Please specify CL
(Minimum 10pF) in pF or
S for series
--- -
Packaging
T: Tape & Reel
Quality Factor***
QXXXk
Minimum
Value
Value Added
I
Insulator Tab
V
Vinyl Sleeve
QXX
Trimmed leads
See Table 2
MJ
Metal jacket
Custom ESR if other
than standard
R□
□: Specify a value in Ω
(e.g.: R40)
Operation Mode
F
Fund. AT > 24MHz
FB Fund. BT>24MHz
O
3^rd OT>66MHz
Operating Temp.
A: -10°C ~ +60°C
B: -20°C ~ +70°C
C: -30°C ~ +70°C
N: -30°C ~ +85°C
D: -40°C ~ +85°C
Freq. Tolerance
1: ± 10 ppm
7: ± 15 ppm
2: ± 20 ppm
3: ± 25 ppm
4: ± 30 ppm
Table 2
Freq. Stability
Options for AT-
Cut only*
U**: ± 10 ppm
G: ± 15 ppm
X: ± 20 ppm
W: ± 25 ppm
Y: ± 30 ppm
H: ± 35 ppm
Z: ± 50 ppm
NOTE:
*:Frequency Stability ±100
ppm maxat -10 to +60C only
for BT cut.
**: -10 to +60C only.
***: Quality factor must be
accompanied by a k value
CODES
Q45
Q40
Q35
Q30
Q25
Q20
Q15
Q10
Q115
TRIMMED L in(mm)
0.45 (11.43)
0.40 (10.16)
0.35 (8.89)
0.30 (7.62)
0.25 (6.35)
0.20 (5.08)
0.15 (3.81)
0.10 (2.54)
0.115 (2.92)
NOTE: Use appropriate code numbers for
other trimmed lengths not listed.
(e.g. Q14 for 0.14 inch (3.55 mm))
ABRACON IS
ISOIS9O00910/0Q1:S20900800
CERTIFIED
Visit www.abracon.com for Terms & Conditions of Sale
Revised: 07.09.14
30332Esperanza, Rancho Santa Margarita, California 92688
tel [phone] | fax [phone] ^{| www.abracon.com}