ASTMUPLP Datasheet, PDF (1/6 Pages) Abracon Corporation – Harsh environment

High Performance, Programmable LVPECL SMD MEMS Oscillator
ASTMUPLP
ASTMUPLP
ESD Sensitive
Moisture Sensitivity Level (MSL) – 1
FEATURES:
• Industry Standard package sizes: 3.2 x 2.5 x 0.75mm,
5 x 3.2 x 0.75mm, 7.0 x 5.0 x 0.9mm
• Any frequency between 1MHz and 625MHz
• Supply Voltage options: 3.3V, 2.8V, 1.8V, 2.25V~3.63V
• Ultra-low RMS phase jitter: 0.6ps typ.
(@156.25MHz, integration bandwidth: 12kHz to 20MHz)
• Frequency Stability options: ±10ppm, ±20ppm, ±25ppm,
±50ppm over -20 to +70°C and -40 to +85°C
• High Performance MEMS Technology by SiTime
STANDARD SPECIFICATIONS:
Parameters
Min
Typ
Output Frequency Range (F)
1
-10
-20
Frequency Stability (F_stab)
-25
-50
-20
Operating Temperature Range (T_use)
-40
1^st year
-2
Aging@25°C
10 years
-5
2.25
2.5
Supply Voltage (V_dd)
2.97
3.3
2.25
-
Input High Voltage(V_IH)
70%*V_dd
Input Low Voltage(V_IL)
Input Pull-up Impedance ( Z_in)
100
2
Startup Time (T_start)
6
Resume Time ( T_resume)
Duty Cycle
45
Output Type
Current Consumption ( I_dd )
OE Disable Current (I_OD)
Output Disable Leakage Current
( I_leak)
Standby Current (I_std)
Maximum Output Current ( I_driver)
Note: 1. Frequencies not supported:
Range 1: From 209.000001MHz to 210.999999MHz
Range 2: From 251.000001MHz to 263.999999MHz
Range 3: From 314.000001MHz to 422.999999MHz
Range 4: From 502.000001MHz to 527.999999MHz
6
LVPECL
61
Pb RoHS/RoHS II compliant
3.2 x 2.5 x 0.75mm;
5.0 x 3.2 x 0.75mm;
7.0 x 5.0 x 0.9mm
APPLICATIONS:
• 10GB Ethernet, SONET, SATA, SAS, Fiber Channel, PCI Express
• Storage
• Servers
• Networking
• Telecom
• Instrumentation
• Harsh environment (vibration, shock-prone and humid)
Max
625
+10
+20
+25
+50
+70
+85
+2
+5
2.75
3.63
3.63
30%*V_dd
250
10
10
55
Unit
MHz
Notes
See Note 1 for Frequencies not
supported
Inclusive of initial tolerance at 25°C,
ppm
and variations over operating
temperature, rated power supply
voltage and load
Option “E”
°C
Option “L”
ppm
Option “25”
V Option “33”
Option “Blank” (default)
V Pin 1
V Pin 1
kΩ
Pin 1, OE logic high or logic low,
ST logic high
MΩ Pin 1, ST logic low
ms
Measured from the time V_dd reaches its
rated minimum value
ms
In standby mode. Measured from the
time ST pin crosses 50% threshold
%
69
mA
Excluding load termination current,
V_dd=2.5V or 3.3V
35
mA OE=Low
1
µA OE=Low
100
µA ST =Low, for all Vdd
30
mA
Maximum average current drawn from
OUT+ or OUT-
ABRACON IS
ISO9001:2008
CE RTIFIED
2 Faraday, Suite# B | Irvine | CA 92618 Revised: 07.22.15
Ph. 949.546.8000 | Fax. [phone]
LLC
Visit www.abracon.com for Terms and Conditions of Sale