ASPI-7318 Datasheet, PDF (1/1 Pages) Abracon Corporation – HIGH CURRENT SHIELDED INDUCTOR

HIGH CURRENT SHIELDED INDUCTOR
ASPI-7318
FEATURES & APPLICATIONS:
• 100% lead (Pb) free.
• Lowest DCR/uH, in this package size.
• Frequency range up to 5.0MHZ.
• Handles high transient current spikes without saturation
• Ultra low buzz noise, due to composite construction.
• Power supply for VTR
• OA equipment
• LCD television set
• Notebook PC
• Portable communication
STANDARD SPECIFICATIONS:
Part Number
L
(µH)
±20%
ASPI-7318- R10
0.10
ASPI-7318- R15
0.15
ASPI-7318- R22
0.22
ASPI-7318- R33
0.33
ASPI-7318- R47
0.47
ASPI-7318- R68
0.68
ASPI-7318- R82
0.82
ASPI-7318- 1R0
1.0
ASPI-7318- 1R5
1.5
ASPI-7318- 2R2
2.2
ASPI-7318- 2R5
2.5
ASPI-7318- 3R3
3.3
ASPI-7318- 4R7
4.7
DCR
(mΩ)
Max
3.5
5.2
5.7
7.0
9.3
13.9
15.9
18.3
34.0
46.0
52.4
60.1
78.0
HEAT RATING
CURRENT
DC AMPS
TYPICAL
18
15
14
12
11
9
8
7
4
3.75
3.5
3.25
3
SATURATION
CURRENT DC
AMPS4 TYPICAL
40
38
26
18
18
17
17
14
11.5
13
10.4
10
8
7.3 x 6.8 x 1.8mm
|||||||||||||||
• Equipments
• DC/DC converters, etc.
TECHNICAL INFORMATION:
• Inductance tested at 200KHz, 0.25VRMS
• Operating Temperature Range -55°C to +125°C
• DC current (A) that will cause an approximate ∆T of 40°C
• DC current (A) that will cause Lo to drop approximately 20%.
• The part temperature (ambient + temp rise) should not
exceed 125°C under worst case operating conditions.
Circuit design, component placement, PWB trace size and
thickness, airflow and other cooling provisions all affect the
part temperature. Part temperature should be verified in
the end application.
Note: All specifications subject to change without notice.
REMARKS:
• Label packing box and reel: RoHS Compliance
OUTLINE DRAWING:
ABRACON IS
ISO 9001 / QS 9000
CERTIFIED
inductance value, in µH
30332 Esperanza, Rancho Santa Margarita, California 92688
tel [phone] | fax [phone] | www.abracon.com