ASGTX Datasheet, PDF (1/10 Pages) Abracon Corporation – Configurable High Performance SMD TCXO/VCTCXO

Configurable High Performance SMD TCXO/VCTCXO
ASGTX
ESD Sensitive _Pb RoHS/RoHS II Compliant
9.0 x 7.0 x 2.24 mm
OVERVIEW:
ASGTX temperature compensated Crystal Oscillators are designed to accommodate a broad breadth of
Precision TCXO requirements, without NRE and extended lead-times. This oscillator series is designed and
manufactured by Abracon Corporation and is available to order from 1pc to high volume production
quantities.
• 1-5 day quick-turn availability of a TCXO/VCTCXO with LVCMOS output, Any frequency
between 10MHz & 250MHz
For example, if a reference oscillator requirement calls out 49.7521MHz; ±1.00 ppm TCXO/VCTCXO
with LVCMOS output, ASGTX can be configured and shipped within 1-5 days and in most cases,
same day if order is received before noon. Customers with low-to-mid annual volume requirements
find it difficult to procure custom frequency TCXO/VCTXCO’s without costly NRE charges and/or
long lead-times (> 12 weeks).
• 1-5 day quick turn availability of a TCXO/VCTXCO requiring LVDS or LVPECL Differential
output, Any frequency between 10MHz to 1.50GHz
ASGTX is available with either LVDS or LVPECL output, from 10MHz to 1.50GHz; at any desired
frequency, such as 149.875MHz, 1.00GHz, 1.5GHz, etc. with as tight as ±1.00 ppm stability over
temperature. No other solution in the marketplace currently offers such capability, especially in a small
form-factor of 9.0x7.0x2.24 mm.
ASGTX is suitable for a wide variety of precision timing applications where TCXO/VCTXO’s are typically
employed. In addition, for high frequency LO requirements, traditionally customers have relied on SAW
based oscillators. Such devices are only available at a few fixed frequencies, such as 915MHz, 1.0GHz,
etc. They are typically in 9x14mm or bigger packages and vary as much as ±100 ppm over temperature.
Although ASGTX series will be slightly less favorable in phase noise performance compared to SAW based
oscillators, it offers the following key advantages:
o ±1.00 ppm stability over -30ºC to +70ºC & ±2.00 ppm stability over -40ºC to +85ºC
o Any carrier frequency between 10MHz & 1.50GHz
o LVCMOS Output (10MHz to 250MHz) or LVDS / LVPECL Output (10MHz to 1.50GHz)
o Small form-factor of 9.0x7.0x2.24 mm
o No NRE or lead-time
FEATURES:
APPLICATIONS:
• 10MHz to 1.50GHz, any Carrier Frequency in differential mode
• 40G & 100G Ethernet
(LVDS or LVPECL)
• WiMax,
• 10MHz to 250MHz, any Carrier Frequency in LVCMOS mode
• LTE, BTS
• -40ºC to +85ºC operating temperature range
• CATV, LAN, LMDS
• ±1.0ppm stability over -30ºC to +70ºC and ±2.0ppm stability over
• Point-to-Point communication networks
-40ºC to +85ºC
• Minimum guaranteed pull ability of ± 10ppm in VCTCXO mode
• Good Phase Noise, excellent Harmonics and Spurious content
• Guaranteed rms jitter of 1.80ps maximum @ 1.50GHz carrier (LVDS mode)
• Immediate availability, 5-day maximum lead-time for small quantities
ABRACON IS
ISO9001:2008
CE RCTEIFRIETDIFIED
2 Faraday, Suit#B, Irvine, California 92618 Revised: 10.16.14
tel:[phone] | fax:[phone]
Visit www.abracon.com for Terms & Conditions of Sale