ASFLMB-BLANK Datasheet, PDF (1/2 Pages) Abracon Corporation – Programmer for PureSilicon Oscillators

Programmer for PureSilicon™ Oscillators
FEATURES:
• Small dongle interfaces thru USB to PC
• Automatic software upgrades via Internet
• Field Programmable Dongle for
- ASxM series – 1st generation MEMS CMOS output
- ASxMB series – 2nd generation MEMS CMOS output
- ASxMPC series – Low Jitter MEMS CMOS output
- ASxMPLP series – Low Jitter MEMS LVPECL output
- ASxMPLV series – Low Jitter MEMS LVDS output
- ASxMPHC series – Low Jitter MEMS HCSL output
• Socket Adapter cards supports:
- 2.5 x 2.0 x 0.85 mm (Available for 1st and 2nd generation CMOS only)
- 3.2 x 2.5 x 0.85 mm (Available for Low Jitter, 1st and 2nd generation MEMS)
- 5.0 x 3.2 x 0.85 mm(Available for Low Jitter, 1st and 2nd generation MEMS)
- 7.0 x 5.0 x 0.85 mm(Available for Low Jitter, 1st and 2nd generation MEMS)
The MEMSpeed Pro II programmer allows users to instantly program Abracon MEMS oscillators to a custom
frequency in seconds through a Microsoft Windows GUI program on a PC. Abracon MEMSpeed Pro II supports
CMOS, LVPECL, LVDS, and HCSL output MEMS oscillators in variety of package sizes. The oscillators can be
programmed over their respective frequency range in increments of 100Hz (up to four decimal point resolution).
a Windows based PC installation program. The MEMSpeed Pro II is used with device dependent socket adapter
cards and the appropriate package devices. (* Additional Socket Adapter is required for ASxM BLANK MEMS
oscillators. Please contact Abracon for details.)
30332 Esperanza, Rancho Santa Margarita, California 92688
tel [phone] | fAx [phone] | www.abracon.com
REVISION: 05/16/11