AMCV-0402LC Datasheet, PDF (1/3 Pages) Abracon Corporation – SMD Multilayer Chip Varistor

SMD Multilayer Chip Varistor
AMCV-0402LC
FEATURES:
• SMD type, small size suitable for high density mounting
• Excellent clamping ratio and strong capability of voltage surge suppression
• Excellent solderability (Ni, Sn plating)
STANDARD SPECIFICATIONS:
Operating Temperature: -55˚C ~ +125˚C
Storage Temperature: -10˚C ~ +40˚C and RH 70% (Max.)
RoHS
Compliant
1.0 x 0.5 x 0.5 mm
APPLICATIONS:
• Transient voltage protection and voltage surge suppression for
LED lighting
• Suitable for LCD-TV, STB, Switch, Router, PLC, Security
System, smart meters, mobile phones
• Suppressing Induced / switching over-voltage caused by
lightning and power
• Protecting DC-DC Module, I/O ports, IC driver
Part Number
Max. Working Varistor Max. Clamping Rated Single Pulse
Typical
Voltage
Voltage
Voltage
Transient
Capacitance
Test Condition
Units
Symbol
ACMV-0402LC-140-C100
<20μA
DC
AC
RMS
Volts Volts
V_WDC V_WAC
14.0 10.0
@1mA
DC
Volts
V_B
16.0-22.0
8/20μs
Volts
V_C*1
30
ESD
Volts
V_C*2
39
Energy
10/1000μs
Joules
E_T
0.005
Peak
Current
8/20μs
Amps
I_P
2
@0.5V_rms,
1MHz
pF
C
10
ACMV-0402LC-140-C120 14.0 10.0 16.0-22.0 30
39
0.005
2
12
ACMV-0402LC-180-C050 18.0 12.7 22.0-28.0 40
48
0.005
2
5
ACMV-0402LC-180-C100 18.0 12.7 22.0-28.0 40
48
0.005
2
10
ACMV-0402LC-260-C030 26.0 18.4 31.0-38.0 58
70
0.003
1
3
ACMV-0402LC-260-C100 26.0 18.4 31.0-38.0 58
70
0.005
2
10
*1: Vc, Maximum peak voltage across the varistor measured at a specified pulse current and waveform.
Energy Rating
Pulse & Waveform
0.00- 0.05 Joule
1A, 8/20μs
0.10 Joule
2A, 8/20μs
0.20-0.50 Joule
5A, 8/20μs
*2: Vc, Maximum peak voltage across the varistor measured at 30ns after initiation of pulse on IEC61000-4-2 30A/8KV.
Test Conditions
Unless otherwise specified, the standard atmospheric conditions for measurement/test as:
a. Ambient Temperature: 20±15˚C
b. Relative Humidity: 65±20%
c. Air Pressure: 86 kPa to 106 kPa
Items
Varistor Voltage at 1mA DC (VB)
Capacitance (C)
Leakage Current (IL)
Clamping Voltage (VC)
Test Methods and Remarks
Measuring current: 1mA DC
Duration: 0.2 to 2 sec
Measure source: 0.5 VRMS
Test frequency: 1MHz.
Measuring voltage: Maximum DC working voltage
Measuring source: 8/20us waveform, ESD waveform
ABRACON IS
ISOIS9O009100/ 1Q:2S0900800
CERTIFIED
Visit www.abracon.com for Terms & Conditions of Sale Revised: 11.30.12
30332 Esperanza, Rancho Santa Margarita, California 92688
tel [phone] | fax [phone] | www.abracon.com