English
Language : 

ACOL1 Datasheet, PDF (1/1 Pages) Abracon Corporation – 2.5Vdc - HCMOS/ TTL COMPATIBLE FULL-SIZE AND HALF-SIZE DIP CRYSTAL CLOCK OSCILLATORS
2.5Vdc • HCMOS/ TTL COMPATIBLE FULL-SIZE AND HALF-SIZE DIP
CRYSTAL CLOCK OSCILLATORS
ACOL 1 and ACHL1
FEATURES:
• Tristate Enable / Disable option.
• Low voltage 2.5Vdc.
• HCMOS and TTL compatible.
• Tight symmetry option.
• Anti-Static packaging tubes.
• Low power.
APPLICATIONS:
• Clock signal sources for digital chips and microprocessors.
• Low power applications.
STANDARD SPECIFICATIONS
PPSaAcTkRaAgAeMTNEypTDeEARSRD SPECIAFCOISLC1P(AE14CTDIIPFI)IOaCnAdNTACISOHLN1S(8 DIP)
Frequency Range
(Fo)
1.00MHz - 85.0MHz
Operating Temperature (TOPR)
0°C to +70°C (See Options)
Storage Temperature (TSTO)
-55°C to +125°C
Frequency Stability
(DF/ Fo)
±100ppm max. (See Options)
Supply Voltage
(Vd d)
2.5Vdc ±10%
Input Current
(I d d)
15m A max.
Duty Cycle or Symmetry
40 / 60% max. (typical 45 / 55%) (See Options)
Rise and Fall Times (TR / TF)
10ns max.
Output Load
5TTL or 15pF
Output Voltage
Start-up Time
Tristate Function
(Option “-A” ONLY)
0.9 *Vdd min. (VOH) 0.1 *Vdd max. (VOL)
(TOSC)
10ms max.
(VIH) “1” or Open: Oscillation
>_ 1.8V
(VIL) “0”:Output disabled in high impedance (Hi Z) < 0.4V
Output Disable / Enable Time
100ns max. (for Option “- A” ONLY)
* Pin 1 has internal pull-up resistor which allows Pin 1 to be left floating (enable high) opt. A.
Test circuit, waveforms, see appendix B. Recommended handling, see appendix F.
Environmental and mechanical specifications, see appendix C. Group 1.
Marking, see appendix G. Value added, see appendix D.
Application notes, see appendix A.
20.2 x 12.6 x 5.08 mm
ACOL1
(14 DIP)
ACH L1
( 8 DIP)
ORDERING OPTIONS
Dimensions: Inches (mm)
ACX L1 - Frequency - Temperature - Overall Frequency Stability - Duty Cycle - Tristate - Value Added - Packaging
O or H
XX.XXXXX MHz or kHz
-R for ± 25ppm max
-K for ± 30ppm max
-H for ± 35ppm max
-S for 45 / 55% @ 1/2Vdd
- A for Tristate E / D
-T for Tape and reel
-TY for Tray packing
-D for -10°C to + 60°C
-E for -20°C to + 70°C
-F for -30°C to + 70°C
-N for -30°C to + 85°C
-C for ± 50ppm max
-G Gull Wing
-G2 Gull Wing (ACHL1)
-QXX (Trimmed Leads)
PIN # PIN #
ACOL ACHL
1
1
7
4
FUNCTION
NC or E/D
GND / Case
-L for -40°C to + 85°C
8
5
Output
** Standard Operating Temperature Only.
14 8
Vd d
ABRACON IS
NOTE: Left blank if standard • All specifications and markings subject to change without notice
29 Journey • Aliso Viejo, CA 92656 • USA
ABRACON
®
ISO 9001 / QS 9000
(949) 448-7070 • FAX: (949) 448-8484
CERTIFIED
E-MAIL: abinfo@ abracon.com • INTERNET ADDRESS: www.abracon.com
C O R P O R A T I O N 53