English
Language : 

ACH Datasheet, PDF (1/1 Pages) Abracon Corporation – CRYSTAL CLOCK OSCILLATORS
5Vdc • HCMOS/ TTL COMPATIBLE HALF-SIZE DIP
CRYSTAL CLOCK OSCILLATORS
AC H
12.7 x 12.7 x 5.6 mm
FEATURES:
• Wide frequency range.
• HCMOS and TTL compatible.
• Tight symmetry option.
• Tristate Enable / Disable function.
• Fast rise and fall times.
• Anti-Static packaging tube.
APPLICATIONS:
• Provide clock signals for microprocessors and digital circuits.
• High output drive capability applications.
STANDARD SPECIFICATIONS
PARAMETERS
SPECIFICATIONS
Frequency Range
(Fo)
Operating Temperature (TOPR)
Storage Temperature (TSTO)
Frequency Stability (DF/ Fo)
Supply Voltage
(Vd d)
Input Current
(I d d)
32.768kHz - 200MHz
0°C to +70°C (See Options)
-55°C to +125°C
±100ppm max. (See Options)
5Vdc ±10%
30mA max. for F< 24MHz 70mA max. for F< 80MHz
45mA max. for F< 50MHz 85mA max. for F>_ 80MHz
Duty Cycle
or Symmetry
Rise and Fall Times
(TR / TF)
45 / 55% max. for F < 50MHz @ 1/2Vdd (See Options)
40 / 60% max. for F >_ 50MHz @ 1/2Vdd (See Options)
10ns max. for F <_ 24MHz
5ns max. for F > 24MHz
Output Load
10TTL or 15pF (50pF max.) for Fo < 80MHz
5TTL or 15pF for (Fo) >_ 80MHz
Output Voltage
Start-up Time
Tristate Function
(Option “-A” ONLY)
0.9 *Vdd min. (VOH) ; 0.4Vdc max. (VOL)
(TOSC)
10ms max.
(VIH) “1” or Open: Oscillation
>_ 2.2V
(VIL) “0”:Output disabled in high impedance (Hi Z) < 0.8V
Output Disable / Enable Time
100ns max. (for Option “- A” ONLY)
* Pin 1 has internal pull-up resistor which allows Pin 1 to be left floating (enable high) Option A.
Test circuit, waveforms, see appendix B..
Environmental and mechanical specifications, see appendix C. Group 1.
Marking, see appendix G. Recommended handling, see appendix F.
Application notes, see appendix A. Reflow profile see appendix E.
Dimensions: Inches (mm)
PIN
NUMBER
1
4
5
8
FUNCTION
NC or Tristate E/D
GND / Case
Output
Vd d
AOCHR- FDreqEueRncyIIN- TeGmpeOratPureT-IOOveNralSl Frequency Stability - Duty Cycle - Tristate - 50 - Value Added - Packaging
XX.XXXX MHz or kHz
-D for -10°C to + 60°C
-E for -20°C to + 70°C
-F for -30°C to + 70°C
-N for -30°C to + 85°C
-L for -40°C to + 85°C
-Y for ± 10ppm max**
-J for ± 20ppm max
-R for ± 25ppm max
-K for ± 30ppm max
-H for ± 35ppm max
-C for ± 50ppm max
-S for 45 / 55% @ 1/2Vdd
-T for 47.5 / 52.5% @ 1/2Vdd
-S1 for 45 / 55% @ 1.4Vdc
-T1 for 47.5 / 52.5% @ 1.4Vdc
50pF load
output drive
-G Gull Wing
-G2 Gull Wing
- T for tape and reel
-TY for Tray packing
- A for Tristate E/D -GHT Gull Wing Reflow capable
-QXX (Trimmed Leads)
** Standard Operating Temperature Only Frequency 50 MHz max.
54
ABRACON ®
C O R P O R AT I O N
NOTE: Left blank if standard • All specifications and markings subject to change without notice
29 Journey • Aliso Viejo, CA 92656 • USA
(949) 448-7070 • FAX: (949) 448-8484
E-MAIL: abinfo@ abracon.com • INTERNET ADDRESS: www.abracon.com
ABRACON IS
ISO 9001 / QS 9000
CERTIFIED