ABV2088 Datasheet, PDF (1/7 Pages) Abracon Corporation – Low Phase Noise VCXO (9.5-65MHz)

Preliminary ABV2088/89
Low Phase Noise VCXO (9.5-65MHz)
FEATURES
• 19MHz to 65MHz fundamental crystal input.
• Output range: 9.5MHz – 65MHz
• Complementary outputs: PECL or LVDS output.
• Selectable OE Logic (enable high or enable low).
• Integrated variable capacitors.
• Supports 2.5V or 3.3V Power Supply.
• Available in 16 pin TSSOP package.
DESCRIPTION
The ABV2088 (PECL) and ABV2089 (LVDS) are
VCXO ICs specifically designed to work with
fundamental crystals between 19MHz and 65MHz.
The selectable divide by two feature extends the
operation range from 9.5MHz to 65MHz. They
require very low current into the crystal resulting in
better overall stability. The OE logic feature allows
selection of enable high or enable low.
BLOCK DIAGRAM
VCON
X+
X-
Oscillator
Amplifier
with
Integrated
Varicaps
O
Q
Q
S2
ABV208X Block Diagram
PIN CONFIGURATION
VDD 1
XIN 2
XOUT 3
DNC 4
S2 5
OE 6
VCON 7
GND 8
16 DNC
15 DNC
14 GNDBUF
13 QBAR
12 VDDBUF
11 Q
10 GNDBUF
9 GND
OUTPUT SELECTION AND ENABLE
OE_SELECT OE_CTRL
State
0
0
Tri-state
1 (Default) Output enabled
0 (Default) Output enabled
1 (Default)
1
Tri-state
Input selection: Bond to GND to set to “0”, bond to VDD to set to “1”
No connection results to “default” setting through
internal pull-up/-down.
OE_CTRL:
Logical states defined by PECL levels if
OE_SELECT is “1”
Logical states defined by CMOS levels if
OE_SELECT is “0”
OUTPUT FREQUENCY DIVIDE BY
TWO SELECTOR
S2
Output
0
Intput/2
1
Input
30332 Esperanza., Rancho Santa Margarita, Ca 92688 Ph: 949-546-8000 Fax: [phone] www.Abracon.com 03/21/05 Page 1