ABSM2_08 Datasheet, PDF (1/2 Pages) Abracon Corporation – MOLDED PLASTIC SMD MICROPROCESSOR CRYSTAL

MOLDED PLASTIC SMD MICROPROCESSOR CRYSTAL
ABSM2
Pb
RoHS
Compliant
FEATURES:
• Suitable for reflow
• Low in height - suitable for thin equipment
• AT-strip cut offers a tight tolerance & stability
APPLICATIONS:
• Computers, Modems, Microprocessors
• Communication, Test equipment
• PCMCIA
12.5 x 4.6 x 3.7mm
|||||||||||||||
STANDARD SPECIFICATIONS:
PARAMETERS
ABRACON P/N
Frequency Range
Operation Mode
ABSM2
3.5 MHz to 70 MHz
AT-strip (see option)
Fundamental 3.5 MHz - 32.0 MHz
Third-Overtone 30.0 MHz - 70.0 MHz
Operating Temperature
- 10°C to + 60°C (see options)
Storage Temperature
- 55°C to + 125°C
Frequency Tolerance
± 50 ppm max. (see options)
Frequency Stability over the ± 50 ppm max. (see options)
Operating Temp. (Ref to +25°C)
Equivalent Series Resistance (max) See Table 1
Shunt Capacitance C0
7pF max.
Load Capacitance CL
18pF (see options)
Drive Level
100μW max.
Aging at 25°C Per Year
± 5ppm max.
Insulation Resistance
500MW min at 100Vdc ± 15Vdc
TABLE 1 - Standard ESR
Frequency (MHz)
3.50 - 3.999
4.000 - 5.999
6.000 - 11.999
12.000 - 32.00(Fund)
30.000 - 35.999(3rd O/T)
33.000 - 70.00(3rd O/T)
ESR (Ω)
200
150
100
50
100
80
OPTIONS & PART IDENTIFICATION:
(Left blank if standard)
ABSM2 - Frequency - - R
-----
Frequency
XX.XXX MHz
Load Capacitance
Please specify CL in pF or S for
Series (minimun 10pF)
Custom ESR
RXXX (Value in Ω)
If it is custom
ABRACON IS
ISO 9001 / QS 9000
CERTIFIED
Operating Temp.
E
0°C to + 70°C
B
-20°C to +70°C
C
-30°C to +70°C
N
-30°C to +85°C
D
-40°C to +85°C
Packaging
T
Tape and
Reel
Mode
F
Fundamental AT
for F>30MHz
Freq. Tolerance
4
± 30 ppm
Freq. Stability
Y ± 30 ppm
H ± 35 ppm
Z ± 100 ppm
Visit www.abracon.com for Terms & Conditions of Sale Revised: 01.11.08
30332 Esperanza, Rancho Santa Margarita, California 92688
tel [phone] | fax [phone] | www.abracon.com