SF0904110YP Datasheet, PDF (7/9 Pages) ABC Taiwan Electronics Corp – SMD LINE FILTER

SPECIFICATION FOR APPROVAL
REF :
PAGE: 7
PROD.
NAME
SMD LINE FILTER
ABC'S DWG NO.
ABC'S ITEM NO.
SF0904□□□□P□-□□□
Ⅸ﹒RELIABILITY TEST FOR AUTOMOTIVE：
Test item
High Temperature Exposure
( Storage )
Operational Life
Reference
MIL-STD-202
Method 108
MIL-STD-T27
Temperature Cycling
Moisture Resistance
Biased Humidity
External Visual
Physical Dimension
Terminal strength
( Leaded )
Resistance to solvents
JESD22
Method
JA-104
MIL-STD-202
Method 103
MIL-STD-202
Method 103
MIL-STD-883
Method 2009
JESD22
Method
JB-100
MIL-STD-202
Method 215
MIL-STD-202
Method 215
Vibration
MIL-STD-202
Method 204
Thermal shock
MIL-STD-202
Method 107
Solderability
Pull strength
( SMD )
J-STD-002
JIS-C-6429
Test condition
1﹒Temperature： 125℃ 105℃ 85℃
2﹒Time：1000 Hr
1﹒Temperature： 125℃ 105℃ 85℃
2﹒Time：1000 Hr
1﹒Temperature： -40℃ to +125℃
-40℃ to +105℃
-40℃ to +85℃
2﹒Cycles：1000 cycles
1﹒Time：24 Hr
2﹒Cycles：1 cycles
1﹒Temperature：85℃ / 85％ RH
2﹒Time：1000 Hr
1﹒Inspect device construction，marking and workmanship﹒
2﹒Electrical Test not required﹒
1﹒Verify physical dimensions to the applicable device detail
specification﹒
2﹒User(s) and Suppliers spec﹒Electrical Test not required﹒
Conditions：(a) 910 g (b) 1.13 Kg (c) 1.45 Kg - mm
Add Aqueous wash chemical﹒OKEM Clean or equivalent﹒
1﹒Time：5 g for 20 min
2﹒Cycles：12 cycles
3﹒Test from：10 - 2000 Hz
4﹒PCB：8〞× 5〞× 0.31〞
1﹒Temperature：-40℃ / +125℃
2﹒Cycles：300 cycles
3﹒Maximum transfer time：20 Sec
4﹒Dwelltime：15 minutes﹒
For both Leaded & SMD﹒Electrical Test not required﹒
Magnification 40X﹒Conditions：
Leaded：Method A @ 235℃，category 3﹒
SMD：a) Method B ，4 Hrs @ 155℃ dry heat @ 235℃
b) Method B @ 215℃，category 3﹒
c) Method D category 3 @ 260℃﹒
Force of 1.8 Kg for 60 seconds﹒
AR-001A