SH40181R0YL Datasheet, PDF (5/7 Pages) ABC Taiwan Electronics Corp – SHIELDED SMD POWER INDUCTOR

SPECIFICATION FOR APPROVAL
REF : 20090506-B
PAGE: 5
PROD.
NAME
SHIELDED SMD
ABC'S DWG NO.
POWER INDUCTOR ABC'S ITEM NO.
SH4018□□□□L□-□□□
Ⅷ﹒RELIABILITY TEST：
Test item
Specification
Test condition
Solderability
More than 95% of the
terminal electrode
Shall be covered
With fresh solder.
Preheat : 155℃ / 4 hours.
Solder : Sn96.5 / Ag3 / Cu0.5 or equivalent
Solder temp. : 235±5℃
Flux : Rosin
Dip time : 5±0.5 seconds
Thermal shock test
( Temp. cycle )
Electrical oharacteristics shall
not change more
than ±20%
Room temp.
15 minutes
Room temp.
15 minutes
Total : 50 cycles
-40 ℃
30 minutes
+105 ℃
30 minutes
Humidity test
High temp.
Resistance test
Temperature : 40±2℃
Humidity : 90±5%
Time : 1000 hours
Temperature : 105±5℃
Applied current : Per spec.
Time : 96 hours
AR-001A