HP040147NML Datasheet, PDF (5/6 Pages) ABC Taiwan Electronics Corp – SHIELDED SMD POWER INDUCTOR

SPECIFICATION FOR APPROVAL
REF : 20090602-A
PAGE: 5
PROD.
NAME
SHIELDED SMD
POWER INDUCTOR
ABC'S DWG No.
ABC'S ITEM No.
HP0401□□□□L□-□□□
Ⅷ﹒RELIABILITY TEST：
Test item
Solderability
Specification
More than 95% of the
terminal electrode
Shall be covered
With fresh solder.
Test condition
Preconditioning: 150℃/16Hrs±30min Dry Bake
Solder : Sn96.5 / Ag3 / Cu0.5 or equivalent
Solder temp. :245±5℃
Flux : Rosin
Dip time: 5±0.5sec
Thermal shock test
( Temp. cycle )
Electrical oharacteristics shall
not change more
than ±20%
Room temp.
15 minutes
Room temp.
15 minutes
Total : 50 cycles
-55 ℃
30 minutes
+125 ℃
30 minutes
Humidity Test
High temp.
Resistance test
Temperature : 40±2℃
Humidity : 90±5%
Time : 1000 hours
Temperature : 125±5℃
Applied current : Per spec.
Time : 96 hours
AR-001A