AAT1109 Datasheet, PDF (14/18 Pages) Advanced Analog Technology, Inc. – ONE-CHANNEL STEP-UP PWM CONTROLLER

Advanced Analog Technology, Inc.
PACKAGE DIMENSION
TSSOP-8
AAT1109
SYMBOL
A
A1
A2
b
C
D
E
E1
e
L
y
θ
DIMENSION IN MILLIMETERS
MIN
TYP
MAX
1.05
1.10
1.20
0.05
0.10
0.15
-----
1.00
1.05
0.25
-----
0.30
-----
0.127
-----
2.90
3.05
3.10
6.20
6.40
6.60
4.30
4.40
4.50
-----
0.65
-----
0.50
0.60
0.70
-----
-----
0.076
0^o
4^o
8^o
DIMENSION IN INCHES
MIN
TYP
MAX
0.041
0.043
0.047
0.002
0.004
0.006
-----
0.039
0.041
0.010
-----
0.012
-----
0.005
-----
0.114
0.120
0.122
0.244
0.252
0.260
0.169
0.173
0.177
-----
0.026
-----
0.020
0.024
0.028
-----
-----
0.003
0^o
4^o
8^o
NOTE:
1. CONTROLLING DIMENSION: MILLIMETERS.
2. LEAD FRAME MATERIAL: OLIN C7025/EFTEC 64T.
3. DIMENSION “D” DOES NOT INCLUDE MOLD FLASH, TIE BAR BURRS AND GATE BURRS. MOLD FLASH,
TIE BAR BURRS AND GATE BURRS SHALL NOT EXCEED 0.006” [0.15 MILLIMETERS] PER END. DIMENSION
“E1” DOES NOT INCLUDE INTERLEAD FLASH. INTERLEAD FLASH SHALL NOT EXCEED 0.010”
[0.25 MILLIMETERS] PER SIDE.
4. DIMENSION “b” DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE
0.003” [0.08 MILLIMETERS] TOTAL IN EXCESS OF THE “b” DIMENSION AT MAXIMUM MATERIAL CONDITION.
DAMBAR CANNOT BE LOCATED ON THE LOWER RADIUS OR THE FOOT. MINIMUM SPACE BETWEEN
PROTRUSION AND AN ADJACENT LEAD TO BE 0.0028” [0.07 MILLIMETERS].
5. TOLERANCE: ± 0.010” [0.25 MILLIMETERES] UNLESS OTHERWISE SPECIFIED.
6. OTHERWISE DIMENSION FOLLOW ACCEPTABLE SPEC.
7. REFERENCE DOCUMENT: JEDEC SPEC MO-153.
–
–
– Advanced Analog Technology, Inc. –
Page 14 of 18
V 1.0