AAT1110 Datasheet, PDF (13/17 Pages) Advanced Analog Technology, Inc. – ONE-CHANNEL STEP-DOWN PWM CONTROLLER

Advanced Analog Technology, Inc.
Package Dimension
TSSOP-8
AAT1110
SYMBOL
A
A1
A2
b
C
D
E
E1
e
L
y
θ
DIMENSION IN MILLIMETERS
MIN
TYP
MAX
1.05
1.10
1.20
0.05
0.10
0.15
-----
1.00
1.05
0.25
-----
0.30
-----
0.127
-----
2.90
3.05
3.10
6.20
6.40
6.60
4.30
4.40
4.50
-----
0.65
-----
0.50
0.60
0.70
-----
-----
0.076
0^o
4^o
8^o
DIMENSION IN INCHES
MIN
TYP
MAX
0.041
0.043
0.047
0.002
0.004
0.006
-----
0.039
0.041
0.010
-----
0.012
-----
0.005
-----
0.114
0.120
0.122
0.244
0.252
0.260
0.169
0.173
0.177
-----
0.026
-----
0.020
0.024
0.028
-----
-----
0.003
0^o
4^o
8^o
NOTE:
1. CONTROLLING DIMENSION: MILLIMETERS.
2. LEAD FRAME MATERIAL: OLIN C7025/EFTEC 64T.
3. DIMENSION “D” DOES NOT INCLUDE MOLD FLASH, TIE BAR BURRS AND GATE BURRS. MOLD FLASH, TIE BAR BU
0.006” [0.15 MILLIMETERS] PER END. DIMENSION “E1” DOES NOT INCLUDE INTERLEAD FLASH. INTERLEAD FLA
MILLIMETERS] PER SIDE.
4. DIMENSION “b” DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.00
“b” DIMENSION AT MAXIMUM MATERIAL CONDITION. DAMBAR CANNOT BE LOCATED ON THE LOWER RADIUS O
PROTRUSION AND AN ADJACENT LEAD TO BE 0.0028” [0.07 MILLIMETERS].
5. TOLERANCE: ± 0.010” [0.25 MILLIMETERES] UNLESS OTHERWISE SPECIFIED.
6. OTHERWISE DIMENSION FOLLOW ACCEPTABLE SPEC.
7. REFERENCE DOCUMENT: JEDEC SPEC MO-153.
–
–
– Advanced Analog Technology, Inc. –
Page 13 of 17
V 1.0