|
AAT4682 Datasheet, PDF (1/10 Pages) Advanced Analogic Technologies – Dual Electronic Resettable Switches | |||
|
General Description
The AAT4682 dual electronic resettable fuse is a
member of AnalogicTechâs Application Specific
Power MOSFET⢠(ASPMâ¢) product family. It has
two 1A current limited P-channel MOSFET power
devices that remain fully enhanced as long as the
input power supply is above an under-voltage lock-
out threshold and the load is below the current limit
setting. If the load increases above the current limit
setting, as is the case during a short circuit, the
MOSFET effectively becomes a constant current
source equal to the current limit. If the current limit
condition persists long enough to heat the MOSFET
to an extreme temperature, both devices will ther-
mal cycle off and on until the current limit condition
is removed. Independent open drain FAULT flags
signal an over-current or over-temperature condi-
tion. Quiescent current typically is a low 10µA.
The AAT4682 is available in a Pb-free, 6-pin
SOT23 package and is specified over the -40°C to
+85°C temperature range.
AAT4682
Dual Electronic Resettable Switch
Features
SmartSwitchâ¢
⢠Dual P-Channel MOSFETs
⢠500mA Steady State Load Current
⢠600mA Minimum Current Limit Trip Point
⢠Low Quiescent Current, Typically 10µA
⢠Over-Temperature Protection
⢠Fast Transient Response:
â <1µs Response to Short Circuit
⢠400mΩ Typical RDS(ON)
⢠Under-Voltage Lockout
⢠Temperature Range: -40°C to +85°C
⢠FAULT Flag with 2ms Blanking
⢠6-Pin SOT23 Package
Applications
⢠Cell Phone Ports
⢠Desktop PCs
⢠Peripheral Ports
⢠USB Ports
Typical Application
INPUT
CIN
1μF
GND
5 IN
AAT4682
OUTA 6
OUTB 4
FAULTA 1
GND
2
FAULTB 3
FAULTA
FAULTB
COUTA
1μF
OUTA
OUTB
COUTB
1μF
GND
4682.2006.05.1.2
1
|
▷ |