English
Language : 

AAT4626 Datasheet, PDF (1/15 Pages) Advanced Analogic Technologies – USB Dual-Channel Power Switch
General Description
The AAT4626 SmartSwitch is part of AnalogicTech's
Application Specific Power MOSFET™ (ASPM™)
product family. It is a dual-channel 500mA current-
limited P-channel MOSFET power switch designed
for high-side load switching applications. This
switch operates with inputs ranging from 2.7V to
5.5V, making it ideal for both 3V and 5V systems.
An integrated current-limiting circuit protects the
input supply against large changes in load current
which may cause the supply to fall out of regulation.
The AAT4626 is also protected from thermal over-
load which limits power dissipation and junction
temperatures. The current limit threshold is factory
programmed at 1.0A, with a maximum of 1.5A. The
quiescent supply current is typically a low 20µA. In
shutdown mode, the supply current decreases to
less than 1µA.
The AAT4626 is available in a Pb-free, 8-pin SOP
or TSSOP package and is specified over the -40°C
to +85°C temperature range.
The AAT4600 series is a family of adjustable and
fixed SmartSwitch products with a range of current
handling capabilities. Single versions are available
with adjustable current limit (AAT4601) or fixed cur-
rent limit (AAT4625), as well as dual versions with
fixed current limit (AAT4626).
AAT4626
USB Dual-Channel Power Switch
Features
SmartSwitch™
• 2.7V to 5.5V Input Voltage Range
• Compliant to USB 1.1 and 2.0 Specifications
• 500mA (Min) Continuous Current per Channel
• 1.25A (Max) Current Limit per Channel
• 90mΩ Typical RDS(ON)
• Low Quiescent Current:
— Typically 20µA
— 1µA Max with Switches Off
• Thermal Shutdown
• Slew Rate Limited Turn On
• Fault Flag with 2ms Blanking
• Under-Voltage Lockout
• Temperature Range: -40°C to +85°C
• UL Approved—File No. E217765
• 8-Pin SOP or TSSOP Package
Applications
• General-Purpose Power Switching
• Hot Swap Supplies
• Notebook Computers
• USB Ports and Peripherals
UL Recognized Component
Typical Application
100kΩ
100kΩ
VCC 5.0V
0.1μF
GND
7
IN
ENA
ENA
1
(ENA)
(ENA)
ENB
ENB
4
(ENB)
(ENB)
AAT4626
GND
6
FLGA 2
FLGB 3
OUTA 8
OUTB 5
47μF
OUTPUTA
OUTPUTB
47μF
GND
4626.2006.05.1.2
1