|
AAT3520 Datasheet, PDF (1/9 Pages) Advanced Analogic Technologies – MicroPower Microprocessor Reset Circuit | |||
|
AAT3520/2/4
MicroPower⢠Microprocessor Reset Circuit
General Description
The AAT3520 series of PowerManager products is
part of AnalogicTech's Total Power Management
IC⢠(TPMICâ¢) product family. These micro-
processor reset circuits are ideal for monitoring volt-
age supplies in portable systems, where extended
battery life is critical. They provide a low-cost, reli-
able solution by eliminating the need for external
components. The AAT3520 series operates by
monitoring the system power supply voltage. When
the input voltage drops below a fixed threshold, the
device asserts a reset signal for a fixed time period
after VCC has risen back above the fixed threshold;
30ms and 150ms minimum periods are available.
The AAT3520 product series is guaranteed to oper-
ate down to 1.2V and is designed to ignore fast line
transients appearing on VCC. The AAT3520 series
is available with three output stage versions:
AAT3520 push-pull active high output; AAT3522
push-pull active low output; and AAT3524 open
drain active low output. The quiescent supply cur-
rent is extremely low, typically 1µA, making it ideal
for portable battery-operated equipment.
The AAT3520/2/4 are available in a Pb-free, 3-pin
SOT23 package and are specified over the -40°C
to +85°C operating temperature range.
Features
PowerManagerâ¢
⢠Input Voltage Range: 1.2V to 5.5V
⢠Operation Down to 1.2V
⢠Extremely Low Quiescent Current: <2µA
⢠High Accuracy Detection Threshold: ±1.5%
⢠Monitor Power Supply Voltages
⢠Fixed Thresholds from 2.2V to 4.6V
⢠Reset Pulse Width Options
â Minimum 30ms or 150ms
â Fast Propagation Delay <20µs
⢠Available Output Configurations:
â Open-Drain Output
â CMOS Active High Output
â CMOS Active Low Output
⢠Temperature Range: -40°C to +85°C
⢠3-Pin SOT23 Package
⢠4kV ESD Rating
Applications
⢠Cell Phones
⢠Embedded Systems
⢠Intelligent Instruments
⢠Notebook Computers
⢠Portable Electronics
Typical Application
VCC
VCC
AAT3520
AAT3522 RESET
AAT3524 (RESET)
*
100kâ¦
(nominal)
VCC
RESET
INPUT
µP
GND
GND
*AAT3524 Only
3520.2006.03.1.2
1
|
▷ |