AAT3153 Datasheet, PDF (1/14 Pages) Advanced Analogic Technologies – High Efficiency 1X/1.5X/2X Charge Pump For White LED Applications

AAT3153
High Efficiency 1X/1.5X/2X Charge Pump
For White LED Applications
General Description
The AAT3153 is a low noise, constant frequency
charge pump DC/DC converter that uses a tri-mode
load switch (1X), fractional (1.5X), and doubling (2X)
conversion to maximize efficiency for white LED
applications. The AAT3153 is capable of driving six
LED channels from a 2.7V to 5.5V input. The current
sinks may be operated individually or in parallel for
driving higher current LEDs. A low external parts
count (two 1µF flying capacitors and two small 1µF
capacitors at V_IN and V_OUT) makes this part ideally
suited for small, battery-powered applications.
AnalogicTech's S²Cwire™ (Simple Serial Control™)
serial digital input is used to enable, disable, and
set current for each LED with eight settings (20mA
down to 50µA) including main and sub-display
group control. The AAT3153 consumes extremely
low current internally (50µA typical) at light load for
optimized efficiency.
Each output of the AAT3153 is equipped with built-
in protection for V_OUT short-circuit and auto-disable
for load short-circuit conditions. Built-in soft-start
circuitry prevents excessive inrush current during
start-up. A low current shutdown feature discon-
nects the load from V_IN and reduces quiescent cur-
rent to less than 1µA.
The AAT3153 is available in a Pb-free, space-saving,
thermally-enhanced 16-pin 4x4mm QFN package.
Features
ChargePump^™
• V_IN Range: 2.7V to 5.5V
• Fully Programmable Current with Single Wire
— Eight-Step Current: 20mA to 50µA
— Individual Main-Sub Group Control
— Low I_Q (50µA) at Light Load
• Tri-Mode 1X, 1.5X, and 2X Charge Pump for
Maximum Efficiency and V_F Coverage
• Drives Up to Six LED Channels
• No Inductors, Low Noise Operation
• 1MHz Constant Switching Frequency
• Small Application Circuit
• Built-In Thermal Protection
• Built-In Auto-Disable for Short-Circuit
• Automatic Soft Start
• I_Q <1µA in Shutdown
• Thermally-Enhanced 4x4mm 16-Pin QFN
Package
Applications
• Color (RGB) Lighting
• Programmable Current Sinks
• White LED Backlighting
• White Photo Flash for Digital Still Cameras
Typical Application
2.7V to 5.5V
VIN
C1+
C1
1µF
CIN
C1-
1µF
C2+
AAT3153
C2
1µF
C2-
EN/SET
VOUT
EN/SET
D1
D2
D3
D4
D5
GND
D6
D1 D2 D3 D4 D5 D6
COUT
1µF
3153.2005.12.0.93
1