AAT1107 Datasheet, PDF (1/16 Pages) Advanced Analog Technology, Inc. – BUCK_BOOST & BOOST PWM CONTROLLER WITH ADJUSTABLE LDO

Advanced Analog Technology, Inc.
Details are subject to change without notice.
AAT1107
BUCK_BOOST & BOOST PWM CONTROLLER
WITH ADJUSTABLE LDO
FEATURES
z Complete PWM Power Control Circuitry
CH1: Buck_Boost, CH2: Boost
z Adjustable Low Dropout (LDO) Regulator
z Under-Voltage Lockout (UVLO) Protection
z Totem Pole Output
z Output Short Circuit Protection
z Dead Time Control : 0% to 100%
z Wide Operating Frequency:
10kHz to 800kHz
PIN CONFIGURATION
TOP VIEW
C_{t 1}
R_{t 2}
16 ^VREF
15 SCP
IE3 3
14 OUT3
IE1 ₄
13 IE2
OE1 5
12 OE2
DTC1
OUT1
GND
6
11
7
10
8
9
TSSOP-16 PACKAGE
DTC2
OUT2
V_DD
GENERAL DESCRIPTION
The AAT1107 provides an integrated two-channel
pulse-width-modulation (PWM) solution for the
power supply of DC-DC system. This device
offers system engineers the flexibility to tailor-make
the power supply circuitry for the specific
applications.
Each channel contains its own error amplifier,
PWM comparator, dead-time control (DTC) and
output driver. The two channels share common
features of under-voltage protection, oscillator,
short circuit protection and voltage reference circuit.
Two dead-time control inputs are assigned for
channel (CH1) and channel 2 (CH2) individually,
and dead-time control inputs can be used to control
on/off operation.
The AAT1107 contains one step-up (boost) circuit
at CH2 and one inverting (buck_boost) circuit at
CH1. In addition, DTC can be set to provide 0%
to 100% dead-time through a resistive divider
network and soft-start can be implemented by
paralleling the DTC resistor with a capacitor.
The Maximum output current of LDO regulator can
be enlarged by connecting an nMOSFET (or NPN
bipolar) as a source follower stage at OUT3 pin.
–
–
– Advanced Analog Technology, Inc. –
Page 1 of 16
V 1.0