PER-T248 Datasheet, PDF (1/1 Pages) AAEON Technology – supports single-shot transmission

PER-T248
Minicard/USB/UART Interface CANBUS Module
Features
■■ _{2 CAN Channels CAN 2.0B}
■■ _{PCI Express Mini Card USB Type Interface Card}
■■ _{Receive Buffers, Masks, Filters, and Data Byte Filtering}
■■ _{Supports Single-shot Transmission}
■■ _{IEC 61000-4-2 (ESD) ± 16KV (air)}
■■ _{Provide API and SDK for Window/Linux}
Specifications
System
Form Factor
PCI Express Mini Card
Interface
Mini-PCI Express (USB signal) x 1
USB (WAFER) x 1
RS-232 (WAFER) x 1
CAN Controller
RX630
High-Speed CAN Transceiver TJA1050
CAN Function
Support dual port CAN
Support CAN 2.0A/B
Implements ISO-11898 Standard Physical Layer
Supports 1 Mb/s operation (125 Kbps default)
Receive buffers, masks, filters, and data byte filtering
Supports Single-shot transmission
100 mA active current (typical)
Transfer rates
125Kbps, 500Kbps, 1Mbps
CAN baud rate
125Kbps ~ 1Mbps
Protections
120 Ohm line termination IEC 61000-4-2 (ESD) ± 15KV (air/contact) Support
Isolation 2Kv
Software
Provide API and SDK for Window & Linux
Provide Utility tools for Window
Firmware Update
Via USB connector
Power Requirement
Requirement +3.3V via Mini-PCIe
Reuirement +5V via USB
Operating Temperature
-20°C ~ 70°C
Storage temperature
-40°C ~ 85°C
Storage humidity
5~ 95% , non-condensing
Vibration
1g RMS / 5~ 500Hz / operation
Shock
20G peak acceleration (11 msec. duration)
Drop
76cm (1 Corner, 3 Edge, 6 Surface)
EMC
CE /FCC class A PreScan
Packing List
• I/O Cable
• Product CD
• PER-T248
Ordering Information
• PER-T248-A10
Mini PCIe, Support CAN Bus 2.0B x 2
Note: All specifications are subject to change without notice.
www.aaeon.com
15-4