FWS-7520 Datasheet, PDF (1/2 Pages) AAEON Technology – lcm with keypad

15 _FWS-7520
1U Rackmount Network Appliance, Intel® Xeon™ Processor SoC with 3 NIM
Front View
RJ-45 Console x 1
IPMI
LAN x 1
NIM Slot x 3
LCM Panel
10 GbE x 2
USB 3.0 Port x 2
LED
SW Programmable Button
Features
■■ _{1U Rackmount Network Appliance}
■■ _{Intel® FCBGA Broadwell DE Xeon Processor}
■■ _{288-pin ECC DDR4 x 4 1600/1867/2133MHz RDIMM Up to 128GB}
■■ _{10/100/1000Base-TX up to 24 Ethernet ports (Optional by NIM}
modules)
■■ _{10GbE SFP+ x 2 or RJ45 x 2 ports (Optional by module)}
■■ _{IPMI (AST2500) port x 1, VGA/BMC/KVMoIP supported}
■■ _{Internal 3.5” SATA HDD x 1 or 2.5” SATA HDD x 2 (Optional up to 6}
SATA3.0 Ports)
■■ _{LCM with Keypad x 1}
■■ _{RJ-45 for Console x 1, USB 3.0 x 2}
■■ _{180W AC type/ 220W Redundant Power Input Requirement}
Rear View
AC Power Input
Specifications
Platform
Form Factor
Processor
Chipset
System Memory
Network
Ethernet
Bypass
NIM Slot
Display
Graphic Controller
Connector
Storage
HDDs
CF/CFast/mSATA
1U Rackmount Network Platform
Intel® Xeon Processor SoC
Integrated
DDR4 1600/1866/2133 RDIMM/UDIMM/ECC, up to 128GB, 288 Pin DIMM x 4
1GbE x 1 + 10GbE x 2 + NIM
Depends on NIM
3
IPMI integrated (Optional)
VGA cable (Optional)
Internal 3.5” SATA HDD x 1 or 2.5” SATA HDD x 2 (Optional)
CF socket x 1 (Optional CFast™ socket or mSATA slot)
Expansion/Internal Interface
PCIe slot
PCIe [x4] signal use [x8] slot
Mini-card slot
—
IPMI
Optional Module
Keyboard and Mouse
Reserve pin-header
Universal Serial Bus
USB 3.0 x 2 Box Header (2.0mm) (optional)
Miscellaneous
RTC
Internal RTC
Watchdog Timer
1~255 step by software programmable
Software Button
GPIO Programmable push button x 1
TPM
Yes
GPIO
8bits, BIOS default 4 bits input, 4bits output.
FAN
3
MTBF (Hours)
—
Color
Black
Environmental Parameters and Dimension
Power Requirement
250W ATX PSU or 220W Redundant PSU (Optional)
Operation Temp.
32°F ~ 104°F (0°C ~ 40°C)
Storage Temp.
-4°F ~ 140°F (-20°C ~ 60°C)
Operating Humidity
10 ~ 80%
Storage Humidity
10 ~ 80% @ 40°C, non-condensing
Vibration
0.5 Grms/ 5 ~ 500Hz/ operation (3.5” H.D.D)
1.5 Grms/ 5 ~ 500Hz/ no operation
Shock
10G peak acceleration (11 m sec. duration), operation
20G peak acceleration (11 m sec. duration), non operation
Chassis Dimension
(W x D x H)
16.93" x 18.7" x 1.73"
(430mm x 475mm x 44mm)
I/O Interfaces
Front Panel
- Power LED x 1
- Status LED x 1
- HDD Active LED x 1
- USB 3.0 Ports x 2
- RJ-45 Console x 1
- Parallel LCM display and 4 keypad x 1
- Software Programmable Switch x 1
Rear Panel
- AC Power Input x 1
- Power Switch x 1
- VGA port (Optional)
- Rear Expansion Slot x 1 (Optional PCIe [x4] signal use x8 slot)
15-9
Note: All specifications are subject to change without notice.