ECB-951D Datasheet, PDF (1/2 Pages) AAEON Technology – Supports COM Express Module Pin-out Type 1/ 2, COM.0 Rev.1.0

05 ^ECB-951D
COM Express Carrier Board
Audio Codec
Speaker
USB
Front Panel
Mini Card Enable/Disable COM 1
Keyboard/ Mouse
MIC In
Line Out
RJ-45 (GbE)
SDVO
USB
System
Recovery
44-Pin PATA
COM 2
USB
DC Jack
COM Express
Connector
Row CD
RTC Battery SATA Power
Hardware Reset
Firmware Hub
SATA COM Express Connector Row AB
SDIO
CompactFlash™
Embedded Controller
USB
Features
■■ _{Supports COM Express Module Pin-out Type 1/ 2, COM.0 Rev.}
1.0
■■ _{RJ-45 x 1, Supports Gigabit Ethernet}
■■ _{LVDS, SDVO, Touch Screen, LCD Backlight Connector}
■■ _{Audio Jack x 2, Speaker Connector x 2}
■■ _{PATA Connector x 1, SATA Port x 1, CompactFlash™ Type 1}
Slot x 1, SDIO Slot x 1
■■ _{USB Port x 6, COM Port x 2}
■■ _{PCI-Express [x1] Slot or Mini Card Slot x 1}
■■ _{+19VDC Input, Battery Connector x 1}
■■ _{SATA Power Connector x 1, 203mm x 119mm}
Mini Card
Touch Screen
LCD Backlight
Battery
LVDS
Specifications
System
COM Express
Connector
I/O Chipset
Front Panel Control
Ethernet
Expansion Interface
Power Supply Type
CMOS Battery
BIOS
Board Size
Gross Weight
Operating Temperature
Storage Temperature
Operating Humidity
MTBF (Hours)
Display
DVI
LVDS
SDVO
Touch Screen
I/O
Storage
Serial Port
USB
x 2: TF-ECB-951D-A10
x 1: TF-ECB-951D-A10-01
Embedded Controller: ITE IT8513E
10-pin wafer (For PER-Y016, system control board)
10/100/1000Base-TX, RJ-45 x 1 (From CPU module)
PCI-Express [x1] slot x 1 or
Mini Card slot x 1 (Default)
+19V DC input, DC power jack x 1
Battery connector x 1 (7-pin wafer)
RTC battery connector x 1 (2-pin wafer)
Firmware Hub x 1 (w/ blank PLCC BIOS chip)
8” x 4.69” (203mm x 119mm)
0.88 lb (0.4 Kg)
32°F ~ 140°F (0°C ~ 60°C)
-40°F ~ 176°F (-40°C ~ 80°C)
0% ~ 90% relative humidity, non-condensing
90,000
Via 9697V03B05-D + 170340030F: SDVO to DVI Daughter Board + Cable (TF-
ECB-951D-A10)
Via 9697V03B06-D + 1706301500: SDVO to DVI Daughter Board + Cable (TF-ECB-
951D-A10-01)
30-pin (15x2) LVDS connector x 1
LCD backlight connector x 1
40-pin (20x2) SDVO connector x 1 (For TF-ECB-951D-A10 only)
4-pin FFC/FPC connector x 1, supports 4-wire touch screen
44-pin PATA connector x 1
SATA port x 1/ SATA power connector x 1
CompactFlash™ Type 1 slot x 1
SDIO slot x 1
RS-232 port x 1 (10-pin (5x2) box header)
RS-232/422/485 port x 1 (9-pin D-Sub connector)
Type A connector x 4 (Host) (Co-lay with 5-pin wafer x 4)
5-pin wafer x 2 (Host)
PS/2 Port
Audio
Switch/Button
6-pin (3 x 2) wafer x 1
Audio jack x 2, supports 2 channel audio (MIC in, Line out)
Analog Codec: Realtek ALC888
Buzzer x 1
Speaker connector x 2 (2-pin wafer x 2)
Audio Amplifier: AD SSM2304CPZ, 2W, Class D
Hardware reset button x 1
Mini Card Enabled/Disabled switch x 1
System recovery button x 1
Packing List
• 9697V03B05-D + 170340030F
SDVO to DVI Daughter Board + Cable (TF-ECB-951D-A10)
• 9697V03B06-D + 1706301500
SDVO to DVI Daughter Board + Cable (TF-ECB-951D-A10-01)
• PER-Y016
System Control Board
• 9681951D00
Cable Kit
1703100260 System Control Board Cable
1709070500 SATA Cable
1702151201 SATA Power Cable
1701440184 44-pin IDE Cable
1700060152 PS2 Cable
• 1757306502
Power Adapter (100-240V Input, +19V Output)
• Quick Installation Guide
• ECB-951D
05-41
Note: All specifications are subject to change without notice.