RHP-10X-R02JYT Datasheet, PDF (3/8 Pages) American Accurate Components, Inc. – HIGH POWER RESISTOR - 20W to 140W

HIGH POWER RESISTOR – 20W to 140W
The content of this specification may change without notification 12/07/07
ELECTRICAL SPECIFICATIONS
Model
Rated Power(heat sink)
Rated Power
Heat Resistance
Withstanding Voltage
Max. Operating Voltage
RHP-10X
20W
1W
5.9 C/W
2000V AC
-
RHP-10B
20W
1W
5.9 C/W
2000V DC
500V or √P*R
Resistance
Nominal Resistance
TCR (ppm°C)
Tolerance
Operating Temp.
0.01 ~ 0.091
E6
±250
±5%
RHP-10C
20W
1W
5.9 C/W
2000V DC
500V or √P*R
RHP-20D
20W
2W
3.3 C/W
2000V DC
500V or √P*R
0.10 ~ 9.1
E24
±100
±5%, ±1%
-55C°C ~ +155°C
RHP-20B
35W
1W
3.3 C/W
2200V DC (1500V AC)
500V or √P*R
RHP-20C
20W
1W
3.3 C/W
2200V DC (1500V AC)
500V or √P*R
10 ~ 220
E24
±50
±1%
Model
Rated Power(heat sink)
Rated Power
Max. Applied Power
Heat Resistance
Withstanding Voltage
Max. Operating Voltage
RHP-50A
100W
3W
100W
1.3 C/W
2500V AC
700V or √P*R (applied)
RHP-50B & RHP-50C
50W
1W
-
2.3 C/W
2000V DC
500V or √P*R
RHP-100A
140W
3W
-
0.9 C/W
2500V AC
700V or √P*R (applied)
Resistance
Nominal Resistance
TCR (ppm°C)
Tolerance
Operating Temp.
0.01~0.091
E6
> ±250
±5%
0.1 ~ 9.1
E12
±100
±5%, ±1%
10 ~ 220
E24
±50
±1%
0.1 ~ 9.1
10 ~ 220
E24
E24
±100
±50
±5%, ±1%
±1%
-55C°C ~ +155°C
0.02~0.091
E6
> ±250
±5%
0.1 ~ 9.1
E12
±100
±5%, ±1%
Resistance Range from 240 ohm to 51K ohm is available as a semi-custom solution for al of the RHP series.
Values such as 2.0, 2.5, 4.0, and 5.0 are available upon special request.
10 ~ 220
E24
±50
±1%
PERFORMANCE
Item
Rated Power
All other models
RHP-50A, 100A
Rated Power (without heat sink)
All other models
RHP-20D
Withstanding Voltage
Load Life
Humidity
All other models
RHP-10X
Temperature Cycle
All other models; RHP-20B & 20C (0.10 ~ 220Ω)
RHP-20B & 20C (0.02 ~ 0.091Ω)
All other models; RHP-20B & 20C (0.10 ~ 220Ω)
Soldering Heat
RHP-50A, 100A
RHP-20B & 20C (0.02 ~ 0.091Ω)
Solderability
All other models
RHP-10X, RHP-50A, 100A
Insulation Resistance
Vibration
Performance
As specified
As specified
As specified
As specified
As specified
± (1.0%+0.05Ω)
± (1.0%+0.05Ω)
± (0.25%+0.05Ω)
± (1.0%+0.05Ω)
± (0.1%+0.05Ω)
± (0.25%+0.05Ω)
± (0.5%+0.05Ω)
> 95% of the surface
> 75% of round
> 1,000 Meg Ω
± (0.25%+0.05Ω)
Condition
-55°C ~ +25°C flange temperature
Free Air
Attached on a simple footprint
60 seconds
25°C, 90 min on, 30 min. off, 1000 hrs.
40°C, 90-95% RH, DC 0.1W, 1000 hrs.
60°C, 90-95% RH, DC 0.1W, 1000 hrs.
-55°C, 30 min., +155°C 30min, 5 cycles
350°C±5°C for 3 sec.
230°C±5°C for 3 sec.
Between terminals and metal back plate
The performance data applies to all RHP models unless otherwise noted.
American Accurate Components, Inc.
188 Technology Drive, Unit H, Irvine, CA 92618
3
TEL: [phone] Š FAX: [phone]