KHLC-06D Datasheet, PDF (1/1 Pages) American Accurate Components, Inc. – RF Filter 100 MHz to 8.0 GHz SMT Package

RF Filter 100 MHz to 8.0 GHz SMT Package
The content of this specification may change without notification 09/18/08
Wide Band
RF Eliminate Filter
KHLC-06d
Feature
⋅ SMT Package in Thin Thickness
⋅ Broad Bandwidth: 100 kHz to 8.0 GHz (-20 dB)
⋅ Comply with Large Current (1.75 A)
KHLC-06d is a RF preventive filer with small size in SMT
package as similar to KHLC-04d performs in a super broadband
width of 100 kHz to 8 GHz (-20 dB).
In the appearance of 5 GHz wireless LAN which represents with
IEEE 802,11a, the frequency applied to the commercial electronics
is getting to be higher. It is impossible to use a conventional
method by bypass capacitor or ferrite beads in order to prevent
noise element like clock noise to wireless signal in the broadband
at the PC side.
In performing data transmission of rapid speed and high quality
as well as controlling the errors, KHLC-06d should be put in
series to the bias (power supply terminal) of the electric device
(ICs and etc) and needs to cut high harmonic wave signal which is
leaked in the power supply line.
It is possible to adopt the applications in the bias circuit for
Combo wireless LAN compliant to IEEE 802.11a/b.
KHLC-06d is in SMT package which can be mounted near the
electric power supply terminals and is made ideal mounting
position electrically.
Absolute Maximum Rating
Parameter
Value (max.)
Unit
Rated Current
1,750
mA
Rated Voltage
25
V
Soldering Temperature
+265 (10 sec)
C
Operating Temperature
−40 ~ +85
C
Storage Temperature
−65 ~ +150
C
Schematics
6
4
KF1
Lo
KF2
1
3
Cp1
C1 Cp2
Cp3
2
Specifications of products are subject to change without notice.
Isolation vs Frequency
0
-10
-20
-30
-40
-50
-60
-70
1M
Frequency [ Hz ]
10G
Electrical Specifications
Parameter
Band Width
DC Resistance
Value
100kHz ~ 8.0GHz (Typ.)
300kHz ~ 5.3GHz (Typ.)
0.1 Ω max.
Condition
−20 dB
−30 dB
−
Dimensions
4.0
0.05
6
4
UNIT : mm
4.5
123
1.27
0.40
0.15
1: Vcc (IN)
2: GND
3: Vcc (OUT)
4: NONE
6: NONE
1.27
0.6
Please do not wire
in this area.
American Accurate Components, Inc.
188 Technology Drive, Unit H, Irvine, CA 92618
TEL: [phone] Š FAX: [phone]