KHLC-04D Datasheet, PDF (1/1 Pages) American Accurate Components, Inc. – RF Filter 100 KHz to 5.8 GHz SMT package

RF Filter 100 KHz to 5.8 GHz SMT package
The content of this specification may change without notification 09/18/08
Wide Band
RF Eliminate Filter
KHLC-04d
Feature
⋅ SMT Package in Thin Thickness
⋅ Broad Bandwidth: 100 kHz to 5.8 GHz (-20 dB)
⋅ Comply with Large Current (1.5 A)
Isolation vs Frequency
0
-10
Getting along with high speed orientation of commercial
electronic apparatus, high harmonic wave (noise) delivered to the
DC power supply extends the frequency from several GHz to
several GHz times by ten. Under such a high frequency
orientation at rapid constant progress, the circuit method like using
a bypass capacitor cannot remove actually high harmonic wave
which is transmitted to the power supplies.
In order to perform high speed transmission of a digital signal,
the power filter KHLC-04d should be put in series to the bias
(power supply terminal) of the electric device (ICs and etc) and
needs to cut high harmonic wave signal which is leaked in the
power supply line. KHLC-04d has an usable frequency range of
100 kHz to 5.8 GHz (-20 dB), which has RF preventive band
characteristics in the wide range and is very ideal for mounting
position electrically as this power filter in SMT package can be
mounted near the power supply terminals of ICs and etc.
-20
-30
-40
-50
-60
-70
1M
Frequency [ Hz ]
10G
Absolute Maximum Rating
Parameter
Value (max.)
Unit
Rated Current
1,500
mA
Rated Voltage
25
V
Soldering Temperature
+265 (10 sec)
C
Operating Temperature
−40 ~ +85
C
Storage Temperature
−65 ~ +150
C
Schematics
6
4
KF1
Lo
KF2
1
3
Cp1
C1 Cp2
Cp3
2
Electrical Specifications
Parameter
Band Width
DC Resistance
Value
100 kHz ~ 5.8 GHz (Typ.)
400 kHz ~ 3.0 GHz (Typ.)
0.13 Ω max.
Condition
−20 dB
−30 dB
−
Dimensions UNIT : mm
4.0
0.05
4.5
6
4
123
1.27
0.40
0.15
1: Vcc (IN)
2: GND
3: Vcc (OUT)
4: NONE
6: NONE
1.27
0.6
Please do not wire
in this area.
Specifications of products are subject to change without notice.
American Accurate Components, Inc.
188 Technology Drive, Unit H, Irvine, CA 92618
TEL: [phone] Š FAX: [phone]