ATP53D-10DG Datasheet, PDF (1/4 Pages) American Accurate Components, Inc. – RF POWER ATTENUATOR

RF POWER ATTENUATOR
The content of this specification may change without notification 10/16/07
Custom solutions are available.
ATP Series - RF Power Attenuators
Custom solutions are available. Call us with your specification requirements.
HOW TO ORDER
ATP 53 SL-10 D G M
Packaging
Impedance Tolerance
G = ±2%
Characteristic Impedance
D = 50Ω C = 75Ω
Attenuation
01 = 1dB
Package Type
D = balanced coaxial
DL = balanced, smd with leads
S = unbalanced coaxial
SL = unbalanced smd with leads
E = balanced with heat sink
Size
53 = 5.00 x 2.70
54 = 5.00 x 3.80
55 = 5.00 x 4.50
84 = 8.00 x 5.25
68 = 6.70 x 8.65
100 = 8..89 x 5.35
120 = 9.53 x 6.35
150 = 11.43 x 7.62
37 = 13.0 x 7.00
ATP Series
RF Power Attenuators
FEATURES
ƒ 4GHz-1/4W, 1.0GHz - 30W, 3.0GHz - 100W, 2.4GHz-
120W, and 2.0GHz - 150W
ƒ Surface Mount Small Size Attenuators
ƒ 50Ω Characteristic Impedance
ƒ Face down configuration on strip line show better return
loss characteristics.
ƒ Long life and temperature stability of thin film technology
provide better performance at a temperature range from
-55°C ~ +155 °C.
APPLICATIONS
ƒ Gain Control Circuits
ƒ Power Boost Amplifiers (GHz) Isolation Circuits
ƒ Transmission Line Loss Compensation for Data
Communications Systems
ƒ Detecting signal control of ATE-LSI test system circuit
board functional test systems
ƒ Industrial measurement electronics
ƒ Medical scientific electronics
ƒ Communications systems
ELECTRICAL SPECIFICATIONS
Part
Package Type Frequency
ATP37
S, D, DL
DC – 1.0 GHz
ATP53
S, SL
DC – 4.0 GHz
ATP54
D, DL
DC – 4.0 GHz
ATP55
S, D
DC – 4.0 GHz
ATP68
E
DC – 1. 0GHz
ATP84
S, D
DC – 1.0 GHz
ATP100
D, DL
DC – 3.0 GHz
ATP120
D, DL
DC – 2.4 GHz
ATP150
D, DL
DC – 2.0 GHz
* Heat Sink will be required starting 30 WATTS.
Power Rating
1.00 W
0.25 W
0.25 W
0.25 W
30.0 W
0.50 W
100 W
120 W
150 W
Attenuation Availability
1db ~ 10db, 20dB, 30db, 40dB
1db ~ 10db, 20dB, 30db, 40dB
1db ~ 10db, 20dB, 30db, 40dB
1db ~ 10db, 20dB, 30db, 40dB
10 dB, 20 dB, 30dB
1db ~ 10db, 20dB, 30db, 40dB
10 dB, 20 dB, 30dB, 40dB
10 dB, 20 dB, 30dB, 40dB
10 dB, 20 dB, 30dB, 40dB
CIRCUIT & INSTALLATION LAYOUTS
Attenuation Tolerance
Impedance
dB
1~6
7 ~ 10
20, 30, 40
dB Tolerance
±0.2
±0.3
±0.4
50Ω ± 1Ω
or
75Ω ± 1Ω
Face Down - RF Signal will be
propagated straight without reflection
ATP100D, ATP120D, ATP150D
ATP100DL, ATP120DL, ATP150DL
NOTES:
1. In order to cool heat from an attenuator and to connect electrically when you attach the attenuator in a printed circuit a metal plate, reserve
soldering on back side of attenuator and reflowing (re-melting) solder with solder iron are recommended.
2. In order to prevent diffusion of grounding conductor, please carry out solder processing of an attenuator quickly.
188 Technology Drive Unit H, Irvine, CA 92618
1
American Accurate Components, Inc. TEL: [phone] Š FAX: [phone] Š Email: [e-mail]