APE1084 Datasheet, PDF (3/10 Pages) Advanced Power Electronics Corp. – 5A Low Dropout Positive Adjustable or Fixed-Mode Regulator

APE1084
Pb Free Plating Product
5A Low Dropout Positive Adjustable or Fixed-Mode Regulator
Absolute Maximum Ratings
Symbol
Vin
P_D
T_ST
T_OP
Parameter
DC Supply Voltage
Power Dissipation
Storage Temperature
Operating Junction Temperature Range
Rating
Unit
-0.3 to 12
V
Internally Limited
-65 to +150
oC
0 to +150
oC
Electrical Characteristics (Under Operating Conditions)
Sym.
Parameter
Conditions (Notes)
V_REF
Reference Voltage
APE1084-XXX
APE1084-1.5
Line ^APE1084-1.8
Regulation APE1084-2.5
APE1084-3.3
APE1084-5.0
APE1084-Adj
APE1084-1.5
Io=10mA, Tj=25^oC, (Vin-Vout)=1.5V
I_O=10mA, V_OUT+1.5V<V_IN<12V, T_J =25^oC
I_OUT = 10mA, T_J = 25^oC, 3V≦V_IN≦12V
I_OUT = 10mA, T_J = 25^oC, 3.3V≦V_IN≦12V
I_OUT = 10mA, T_J = 25^oC, 4V≦V_IN≦12V
I_OUT = 10mA, T_J = 25^oC, 4.8V≦V_IN≦12V
I_OUT = 10mA, T_J = 25^oC, 6.5V≦V_IN≦12V
V_IN=3.3V, 0mA<Io<5A, T_J =25^oC
(Note 1,2)
V_IN=3V, 0mA<Io<5A, T_J =25^oC
(Note 1,2)
Load
Regulation
APE1084-1.8
APE1084-2.5
APE1084-3.3
APE1084-5.0
∆Vo Dropout Voltage
Current Limit
TV_JIN==235.3^oCV,(0NmotAe<1Io,2<)5A
TV_JIN==245V^{o,C0m(NAo<teIo1<,52A)}
V_IN = 5V, 0mA<Io<5A , T_J=25^oC (Note 1,2)
V_IN = 8V, 0mA<Io<5A, T_J=25^oC (Note 1,2)
Io=5.0A (∆Vout = 1% Vout)
Vin-Vout=5V
Minimum Load
Current
Temperature
Stability
Io=10mA
θ_JA
Thermal Resistance
Junction-to-Ambient
(No heat sink ;No
air flow)
TO-252
TO-263
TO-220
Min.
1.225
1.470
1.764
2.450
3.235
4.900
5.1
Typ.
1.250
1.500
1.800
2.500
3.300
5.000
12
15
20
26
40
1.3
5
0.5
98
83
83
Max.
1.275
0.2
1.530
1.836
2.550
3.365
5.100
1
15
18
25
33
50
1.4
10
Unit
V
%
V
V
V
V
V
%
mV
mV
mV
mV
mV
V
A
mA
%
O_C/W
θ_JC
Thermal Resistance
Junction-to-Case
TO-252: Control Circuitry/Power Transistor
TO-263: Control Circuitry/Power Transistor
TO-220: Control Circuitry/Power Transistor
10
0.65/2.7
0.65/2.7
O_C/W
Note 1: See thermal regulation specifications for changes in output voltage due to heating effects. Line and load regulation are measured
at a constant junction temperature by low duty cycle pulse testing. Load regulation is measured at the output lead = 1/18” from the
package.
Note 2: Line and load regulation are guaranteed up to the maximum power dissipation of 15W. Power dissipation is determined by the
difference between input and output and the output current. Guaranteed maximum power dissipation will not be available over the
full input/output range.
Advanced Power Electronics Corp.
www.a-power.com.tw
3/10