APE8988_14 Datasheet, PDF (1/10 Pages) Advanced Power Electronics Corp. – 1.5A LOAD SWITCH WITH CONTROLLED TURN ON

Advanced Power
Electronics Corp.
APE8988
1.5A LOAD SWITCH WITH CONTROLLED TURN-ON
FEATURES
▓ Integrated 1.5A Single Channel Load Switch
▓ Input Voltage Range: 0.8V to 5.5V
▓ Low Threshold Control Input
▓ Quick Output Discharge Transistor
▓ Over-Temperature Protection
▓ Over Current Protection
▓ Short Circuit Protection
▓ Open-Drain Fault Flag Output
▓ Low ON-Resistance R_ON = 40mΩ
▓ Halogen Free Product
APPLICATIONS
▓ Telecom Systems
▓ Set-Top-Box
▓ Consumer Electronics
▓ Notebooks / Netbooks
DESCRIPTION
The APE8988 is a low R_ON load switch with
controlled turn on. It contains one N-channel
MOSFET that can operate over an input voltage
range of 0.8V to 5.5V and support maximum
continuous current up to 1.5A. The switch is
controlled by an on/off input (EN), which is capable
of interfacing directly with low-voltage control
signals.
Additional features include a 330Ω on-chip load
resistor is added for output quick discharge when
switch is turned off. A well protection is equipped
when the device enters hard short circuit and
thermal shutdown.
The APE8988 is available in small SOT-26 package
with smallest components.
TYPICAL APPLICATION
+5V
V_IN
C_IN
1uF
VBIAS
VIN
FLG
APE8988
EN
VOUT
GND
R_F
10kΩ~100kΩ
*R₁
10kΩ
FLAG
*C1
0.1uF
V_OUT
C_OUT
0.1uF
*Option for flag transient filtering
Data and specifications subject to change without notice
1
20131015V1.2