English
Language : 

APE8838 Datasheet, PDF (1/7 Pages) Advanced Power Electronics Corp. – DUAL CHANNEL LDO REGULATORS WITH ENABLE
Advanced Power
Electronics Corp.
APE8838
DUAL CHANNEL LDO REGULATORS WITH ENABLE
FEATURES
Input Voltage Range : 2.5V to 6V
Varied Fixed Output Voltage Combinations
150mV Dropout at 100mA Output
Current (Vout≧2.8V)
Output Current: 200mA/channel (typ.)
Low Quiescent Current
Standby Current: 2uA (typ.)
Current Limit and Short Current Protections
Thermal Shutdown Protection
Fast Transient Response
Low ESR Capacitor Compatible (X7R, X5R)
Available in the 6-Pin Pb-Free SOT-26
and DFN 2x2 Packages
DESCRIPTION
The APE8838 is a high accurately, low noise, high
ripple rejection ratio, low dropout, dual CMOS LDO voltage
regulators with enable function. The EN function allows the
output of each regulator to be turned off independently,
resulting in greatly reduced power consumption.
The APE8838 has the soft start function to suppress
the inrush current. The current limit is over 250mA per
channel and also operates as a short protection for the
output current limiter. The output voltage for each regulator
is set independently by metal trimming.
The APE8838 is fully compatible with low ESR ceramic
capacitors, reducing cost and improving output stability. This
high level output stability is maintained even during frequent
load fluctuations, due to the excellent transient response
performance and high PSRR achieved across a broad range
of frequency. It is available in the SOT-26 and DFN 2x2
packages.
TYPICAL APPLICATION
VIN
C IN
VOUT2
1uF
EN2 VIN EN1
VOUT2 VOUT1
COUT2
GND
APE8838
1uF
V OUT1
COUT1
1uF
ORDERING INFORMATION
APE8838 X X - HF
Output Type Package
(Refer Table) Y : SOT-26
GN2 : DFN 2x2
Halogen Free
Output Type Code : (VOUT1+VOUT2)
A : 1.5V+2.8V H : 2.8+3.0V R : 3.3V+1.8V
B : 1.8V+2.8V J : 2.8+3.3V T : 1.5V+3.3V
C : 1.8V+2.6V K : 3.0+3.0V V : 1.5V+3.0V
D : 1.8V+3.3V L : 3.0V+3.3V W : 1.2V+2.8V
E : 2.5V+2.8V M : 3.3+3.3V X : 1.2V+1.2V
F : 2.8V+1.2V P : 1.8V+3.0V Y : 2.8V+1.5V
G : 2.8V+1.8V Q : 1.5V+2.5V
Table1.
Data and specifications subject to change without notice
1
201003171