APE2901 Datasheet, PDF (1/10 Pages) Advanced Power Electronics Corp. – MICROPOWER VFM STEP-UP DC/DC Converter

Advanced Power
Electronics Corp.
APE2901
MICROPOWER VFM STEP-UP DC/DC Converter
FEATURES
Very Low Supply Current
Regulated Output Voltage
Wide Range of Output Voltage is Available from
2.5V to 5.0V by 0.1V Steps
Output Voltage Accuracy ±5%
Output Current up to 100mA
Low Ripple and Low Noise
Very Low Start-up Voltage
High Efficiency (Vout = 5V TYP. 87%)
Few External Components
Internal Soft-Start
Low Profile: SOT-23, SOT-89 & SOT-23-5L Pb-Free
DESCRIPTION
The APE2901 is a high efficiency VFM Step-up DC/DC
converter for small, low input voltage or battery powered
systems with ultra low quiescent supply current. The
APE2901 accept a positive input voltage from start-up
voltage to VOUT and convert it to a higher output voltage in
the 2.5 to 5V range.
The APE2901 combine ultra low quiescent supply
current and high efficiency to give maximum battery life. The
high switching frequency and the internally limited peak
inductor current permits the use of small, low cost inductors.
Only three external components are needed an inductor a
diode and an output capacitor.
The APE2901 is suitable to be used in battery powered
equipment where low noise, low ripple and ultra low supply
current are required. The APE2901 is available in very small
package: SOT-23, SOT-89 & SOT-23-5L.
Typical applications are pagers, cameras & video
camera, cellular telephones, wireless telephones, palmtop
computer, battery backup supplies, battery powered
it
TYPICAL APPLICATION
VIN
47uH
C1
100uF
NC SW
GND
NC OUT
APE2901
D1
B140
C2
47uF
VOUT
C3
1uF
ORDERING INFORMATION
APE2901XX-XX
Package Type
Y5 : SOT-23-5L
N : SOT-23
G : SOT-89
VOUT
22 : 2.2V
25 : 2.5V
26 : 2.6V
27 : 2.7V
:
50 : 5.0V
Data and specifications subject to change without notice
1
201009076