AL-HW433A Datasheet, PDF (1/5 Pages) A-BRIGHT Inc – White SMD Chip LED Lamps

A-BRIGHT _{A-BRIGHT INDUSTRIAL CO., LTD.}
SURFACE MOUNT LED LAMPS
1206 Package White SMD Chip LED Lamps
Part Number: AL-HW433A
Package outlines & Re-flow Profile
„Reflow Temp/Time
For Reflow Soldering
„Soldering iron
Basic spec is U 5sec when 260℃. If temperature is higher,
time should be shorter (+10℃Æ -1sec ).Power dissipation of
iron should be smaller than 15W, and temperatures should
be controllable .Surface temperature of the device should be
under 230℃ .
ITEM
Resin (mold)
Lens color
Printed circuit board
Dice
Emitted color
MATERIALS
Epoxy
Yellow Diffused
BT
InGaN
White
NOTES:
1. All dimensions are in millimeters (inches);
2. Tolerances are ±0.1mm (0.004inch) unless otherwise noted.
3. Soldering terminal may shift in x, y direction.
4. Polarity referring on to the Cathode mark is reversed on the
red.
2006/10/18