AL-HUBG6B434T Datasheet, PDF (1/6 Pages) A-BRIGHT Inc – Full Color Chip LED Lamps

A-BRIGHT _{A-BRIGHT INDUSTRIAL CO., LTD.}
SURFACE MOUNT LED LAMPS
Full Color Chip LED Lamps
Part Number: AL-HUBG6B434T
Package outlines & Re-flow Profile
„Reflow Temp/Time
For Reflow Soldering
„Soldering iron
Basic spec is U 5sec when 260℃. If temperature is
higher, time should be shorter (+10℃Æ -1sec ).Power
dissipation of iron should be smaller than 15W, and
temperatures should be controllable .Surface temperature
of the device should be under 230℃ .
ITEM
Resin (mold)
Lens color
Printed circuit board
Dice
Emitted color
MATERIALS
Epoxy
Water Clear
BT
AlGaInP
InGaN
InGaN
Brilliant Red
Brilliant Green
Blue
NOTES:
1. All dimensions are in millimeters (inches).
2. Tolerances are ±0.1mm (0.004inch) unless
otherwise noted.
3. Polarity referring onto the cathode mark is reversed
on the red.