AL-HKB33_09 Datasheet, PDF (1/5 Pages) A-BRIGHT Inc – 1206 Package Yellow SMD Chip LED Lamps

A-BRIGHT _{A-BRIGHT INDUSTRIAL CO., LTD.}
SURFACE MOUNT LED LAMPS
1206 Package Yellow SMD Chip LED Lamps
Part Number: AL-HKB33
Package outlines & Re-flow Profile
„ Reflow Temp./Time
RECOMMEND PAD LAYOUT
Temp.
10sec Max.
240℃Max.
5℃/sec Max.
℃
60~120sec
4℃/sec Max.
Time
„Soldering iron
Basic spec is U 5sec when 260℃. If temperature is higher, time
should be shorter (+10℃Æ -1sec ).Power dissipation of iron
should be smaller than 15W, and temperatures should be
controllable .Surface temperature of the device should be under
230℃ .
ITEM
Resin (mold)
Lens color
Printed circuit board
Dice
Emitted color
MATERIALS
Epoxy
Water Clear
BT
AlGaInP
Yellow
NOTES:
1. All dimensions are in millimeters (inches);
2. Tolerances are ±0.1mm (0.004inch) unless otherwise noted.
3. Soldering terminal may shift in x, y direction.
4. Polarity referring on to the Cathode mark is reversed on the
red.