67-22SDRVGC Datasheet, PDF (1/5 Pages) A-BRIGHT Inc – Top View LEDs With Bi-Color

A-BRIGHT _{A-BRIGHT INDUSTRIAL CO., LTD.}
SURFACE MOUNT CHIP LED LAMPS
Top View LEDs With Bi-Color
Part Number: 67-22SDRVGC
Package outlines & Re-flow Profile
„Reflow Temp/Time
For Reflow Soldering
„Soldering iron
Basic spec is U 5sec when 260℃. If temperature is higher,
time should be shorter (+10℃Æ -1sec ).Power dissipation
of iron should be smaller than 15W, and temperatures
should be controllable .Surface temperature of the device
should be under 230℃ .
ITEM
MATERIALS
Resin (mold)
Epoxy
Lens color
Water Clear
Printed circuit board
BT
Material _SDR
&
Emitted color ^VG
AlGaInP
GaP/GaP
Super Deep Red
Green
NOTES:
1. All dimensions are in millimeters (inches).
2. Tolerances are ±0.1mm (0.004inch) unless otherwise
noted.
3. Polarity referring onto the cathode mark is reversed
on the red.
2006/10/12