92318 Datasheet, PDF (93/130 Pages) 3M Electronics – Engineered Metalworking Solutions

Adhesives
3M^™ Adhesive Selection Guide
Metal to:
Metal
Structural Adhesives: Each adhesive has high
cohesive strength to bond high strength materials
and potentially replace mechanical fasteners.
3M^™ Scotch-Weld^™
Epoxy, Acrylic
Adhesives
3M^™ Scotch-Weld^™
Instant Adhesives
Non-Structural Adhesives
3M^™ Scotch-Weld^™
Adhesives
3M^™ Aerosol
Adhesives
Acrylics, Epoxies
CA40H
1357, 1099 (All), 1300
80, 90
EPDM Rubber
—
CA40H
4799
—
Rubber (except EPDM)
Flexible 2-part Epoxies
CA40H
1300, 847
80, 90*
Glass and Ceramics
Flexible 2-part Epoxies
—
1357
80, 90
Leather
Flexible 2-part Epoxies
—
847
80
Plastics (Polyolefins)
DP8005
—
—
90
Plastics (ABS, PVC, Acrylic, etc.)
DP8005
CA40H
1357
77, 80, 90
Plastics (High Performance Nylon)
DP460
CA40H
1099 (All)
77, 80, 90
Plastics (Flexible Vinyl)
Flexible 2-part Epoxies
CA40H
1099 (All)
80
Paper and Cardboard
2-part Epoxies
—
10
77
Fabric, Felt, Cork and Fibrous Glass
2-part Epoxies
—
—
74, 77, 80, 90
Flexible Foam (Latex, Urethane)
—
—
—
74, 90
Rigid Foam (Beadboard, Styrene)
Flexible 2-part Epoxies
—
—
—
Rigid Foam (Urethane)
Flexible 2-part Epoxies
CA40H
1357, 5, 10
74, 80
Note: The technical information and data on these pages should be considered representative or typical only and should not be used for specification purposes. Final product
selection should be made only after consideration of a variety of factors and evaluations of sample bonds.
*Produces a temporary bond on these materials. (1) Adhesives must be force dried and bonded while warm. (2) For best results, preheat the substrate to a minimum of
120°F (49°C). (3) Evaluate usage surface activator.
89